Buscar
Mostrando ítems 71-80 de 1597
Comparison of different fluorapatite dip coated layers on porous zirconia tapes
(Elsevier, 2014-09)
Fluorapatite (FA) layers with different thickness and microstructures on porous 3 mol% yttria-partially stabilized zirconia (Y-PSZ) substrates have been fabricated by dipping porous zirconia tapes into aqueous fluorapatite ...
Influence of pH of Colloidal Suspension on the Electrical Conductivity of SnO2 thin Films Deposited Via Sol-Gel-Dip-Coating
(Universidade Federal de São Carlos (UFSCar), Dept Engenharia Materials, 2011-01-01)
Tin dioxide (SnO2) thin films are deposited by the dip-coating technique from colloidal suspensions prepared with distinct pH through the sol-gel method. The decrease of the pH contributes to the destruction of an electrical ...
Waterborne Casein-Based Latexes with High Solids Content and its High-Throughput Coating Optimization
(American Chemical Society, 2016-09)
Over the last few years casein-based latexes have attracted increasing interest because of their good film-forming properties. This paper investigates the use of acrylic/casein hybrid latexes with a solids content of 35% ...
Characterization of historical coating mortars of La Ceramo factory in Valencia
(Univ Politecnica Valencia, Editorial Upv, 2019-06-01)
The objective of this paper was to characterize historical coating mortars taken from the La Ceramo factory, in Valencia, by means of historical, in situ and sample collection at various points in the building, for subsequent ...
Poly (polyol sebacate) Elastomers as Coatings for Metallic Coronary Stents
(Wiley-vch, Inc, 2016-10)
Biocompatible polymeric coatings for metallic stents are desired, as currently used materials present limitations such as deformation during degradation and exponential loss of mechanical properties after implantation. ...
Rolling contact fatigue resistance of PVD CrN and TiN coated austempered ductile iron
(Elsevier Science Sa, 2013-09-21)
This work studies the rolling contact fatigue (RCF) behavior of PVD CrN and TiN coated ADI samples. The effect of the substrate surface finishing method (grinding and polishing) and coating material on RCF life is also ...
Analysis of the life of cemented carbide drills with modified surfaces
(Springer London LtdLondonInglaterra, 2014)
High-velocity plasma spray process using hybrid SiO2 + ZrO2 precursor for deposition of environmental barrier coatings
(2020-12-25)
The demand for the development of more efficient, low emission, and high-performance aircraft have required new methods to obtain lighter materials, with higher temperature resistance and chemical stability. For these ...
Cr3C2-NiCr and WC-Ni thermal spray coatings as alternatives to hard chromium for erosion-corrosion resistance
(ELSEVIER SCIENCE SA, 2008)
Cr3C2-NiCr and WC-Ni coatings are widely used for wear applications at high and room temperature, respectively. Due to the high corrosion resistance of NiCr binder, Cr3C2-NiCr coatings are also used in corrosive environments. ...
Cr3C2-NiCr and WC-Ni thermal spray coatings as alternatives to hard chromium for erosion-corrosion resistance
(Elsevier B.V. Sa, 2008-01-15)
Cr3C2-NiCr and WC-Ni coatings are widely used for wear applications at high and room temperature, respectively. Due to the high corrosion resistance of NiCr binder, Cr3C2-NiCr coatings are also used in corrosive environments. ...