Buscar
Mostrando ítems 1-10 de 365
Electrochemical studies of copper-aluminum-silver alloys in 0.5 M H2SO4
(Elsevier B.V., 2001-01-15)
The electrochemical behavior in 0.5 M H2SO4 at 25 degreesC of a Cu-Al(9.3 wt%)-Ag(4.7 wt%) alloy submitted to different heat treatments and an annealed Cu- Al(9.7 wt%)-Ag(34.2 wt%) were studied by means of open circuit ...
Evaluation of corrosion resistance of aluminum-based alloys in bioethanol produced in Misiones
(Elsevier, 2015-09)
Nowadays, biofuels represent a large part of renewable energies destined to substitute fossil fuels, and to reduce the negative impact on the environment. Bioethanol is obtained by alcoholic fermentation, and is used pure ...
On the electrochemical behavior of Cu-16%Zn-6.5%Al alloy containing the β'-phase (martensite) in borate buffer
(2013-07-11)
In this work, the electrochemical behavior of Cu-16(wt.%)Zn-6.5(wt.%)Al alloy containing the β'-phase (martensite) was studied in borate buffer solution (pH 8.4) by means of open-circuit potential (EOC), electrochemical ...
The application of computational thermodynamics and a numerical model for the determination of surface tension and Gibbs-Thomson coefficient of aluminum based alloys
(Elsevier Science BvAmsterdamHolanda, 2011)
Alloy Aluminum Solidification in Square Section
(Universidad de TarapacáFacultad de Ingeniería, 2006)
Evaluation of the Thixoformability of AA7004 and AA7075 Alloys
(Univ Fed Sao Carlos, Dept Engenharia MaterialsSao CarlosBrasil, 2010)
Microstructural development in Al-Sn alloys directionally solidified under transient heat flow conditions
(Elsevier Science SaLausanneSuíça, 2008)
Experiments on stress-triaxiality dependence of material behavior of aluminum alloys
(ELSEVIER SCIENCE BV, 2010)
The paper presents and discusses experimental procedures, visual observations and test results considered important to obtain data that can be used in validation of constitutive relations and failure criteria. The aim is ...
Efeito das técnicas de fusão sobre a fluidez de ligas do sistema cobre-alumínio.
(1990-12-01)
It was evaluated the castability of four copper-aluminium alloy according the melting casting method used. The specimens were made using polyester mesh screen, with 11 x 11 filaments of 0.26 mm thick, fixed along of two ...