dc.creatorCamacho López, Marco Antonio; 121749
dc.creatorVIGUERAS SANTIAGO, ENRIQUE; 25387
dc.creatorHERNANDEZ LOPEZ, SUSANA; 30493
dc.creatorCamacho López, Marco Antonio
dc.creatorVIGUERAS SANTIAGO, ENRIQUE
dc.creatorHERNANDEZ LOPEZ, SUSANA
dc.date2016-03-16T17:17:37Z
dc.date2016-03-16T17:17:37Z
dc.date2007
dc.identifierhttp://www.redalyc.org/articulo.oa?id=57036163068
dc.identifierhttp://hdl.handle.net/20.500.11799/39380
dc.descriptionIn this work we report on the formation of microchannels on dye-polymethacrylic acid films using a cw-laser. A focalized beam of a He-Ne laser (632.8 nm emission line) was used to form microchannels on the films. It was found that there exists a laser power density threshold for a pit formation that depends on the dye concentration. The dimensions of the laser-induced channels are dependent on the laser power density. Microchannel formation in the transparent polymethacrylic acid films was not observed. Green colored films were obtained by the spin coating technique from a polymethacrylic acid solution mixed with commercial dye°R . All the films obtained presented four absorption bands at 607, 636, 677 and 713 nm. These results show that this material could be applied in microfluidic devices.
dc.formatapplication/pdf
dc.languageeng
dc.publisherSociedad Mexicana de Física A.C.
dc.relationhttp://www.redalyc.org/revista.oa?id=570
dc.rightsopenAccess
dc.rightshttp://creativecommons.org/licenses/by-nc-nd/4.0
dc.sourceRevista Mexicana de Física (México) Num.7 Vol.53
dc.subjectFísica, Astronomía y Matemáticas
dc.subjectLaser-induced
dc.subjectmicrochannels
dc.subjectdye-polymers
dc.subjectCIENCIAS FÍSICO MATEMÁTICAS Y CIENCIAS DE LA TIERRA
dc.titleCW-laser induced microchannels in dye-polymethacrylic acid films
dc.typeArtículo
dc.typearticle


Este ítem pertenece a la siguiente institución