Artigo
Shaking settings to reduce the breakdown of Entisol fragile particles in texture analysis
Registro en:
Gubiani PI, Almeida TA, Mulazzani RP, Pedron FA, Suzuki LEAS, Pereira CA. Shaking settings to reduce the breakdown of Entisol fragile particles in texture analysis. Rev Bras Cienc Solo. 2021;45:e0210066.
1806-9657
Autor
Gubiani, Paulo Ivonir
Almeida, Thiago Assunsão de
Mulazzani, Rodrigo Pivoto
Pedron, Fabrício de Araújo
Suzuki, Luis Eduardo Akiyoshi Sanches
Pereira, Caroline Andrade
Institución
Resumen
Finding the proper shaking setting to ensure total particle dispersion without altering the content of sand, silt and clay in soils composed of fragile particles such as saprolite fragments is still a research gap. This study aimed to identify the best shaking setting to optimize particle dispersion and minimize particle change in samples of Entisol (Neossolos). Samples were dispersed using an electric mixer at 12,000 rpm for 5, 15, 30 and 60 min, a horizontal shaker at 150 cycles min -1 for 1, 2, 4, 8 and 16 h with and without the use of nylon spheres, and an ultrasonic shaker at 70 and 110 J mL -1 for approximately 20 and 30 min, respectively. All the treatments affected particle distribution. Coarse sand reduced up to 14 % and clay content increased up to 18 % with the horizontal shaker with nylon spheres and the electric mixer. These changes were attributed to the breakdown of saprolite fragments, which represented around 1/3 of the coarse sand. Our results showed that the best setting was the horizontal shaker at 150 cycles min -1 for 1 to 2 h without using nylon spheres. This option allowed optimizing particle dispersion and minimizing changes in particle size distribution.