Dissertação
Investigação dos efeitos da posição de impressão e geometria da matriz no processo de extrusão polimérica com pellets visando a manufatura aditiva
Fecha
2023-02-27Registro en:
Autor
Oliveira, Renan Oscar de
Institución
Resumen
The trend of additive manufacturing (AM), also known as 3D printing, has been gaining prominence
in the industry in recent years, consequently, a growing front of studies has been conducted
to ensure quality and productivity. There are several efforts in different directions to
expand knowledge, breaking barriers in 3D printing, specifically in Fused Deposition Modeling
(FDM), such as the manufacture of parts using directly fused pellets (FPM) and the increase
of the dimensional scale of the printed parts, towards the production of large volume parts
(LFAM-Large-Format Additive Manufacturing). Exploiting the advantages of 3D printing using
polymeric pellet material directly, this study uses ABS (acrylonitrile butadiene styrene) as a raw
material and a laboratory single-screw extruder to investigate the effects of flow rate on varying
the print position and final geometry of the extruded filament as a function of the dedicated
nozzle geometric shape. The patterns were analyzed from a series of 72 extrusion conditions. By
collecting and analyzing the operating data, the linear relationship between screw rotation and
extruder mass flow rate was confirmed, and it was possible to get the characteristic values of this
equipment. The internal pressure in the screw is strongly influenced by the screw rotation speed.
A variation of the density of the extruded material was identified at rotations lower than 20 rpm.
For rotations equal to or greater than 20 rpm, a stability of the density is noted, confirming the
rotation range of 30 - 60 rpm suggested by the manufacturer. From the geometric shape of the
extruded filaments, it was evident the influence of the viscoelastic effect of the polymeric material
(Barus effect) and proved its normal expansion ratio directly related to the geometric section
shape of the nozzle, in agreement with the numerical simulations in previous studies. With
the dedicated geometric nozzle shape, it was possible to extrude filaments with final quadratic
geometry, which favors in decreasing the void density. The understanding and control of these
phenomenons lead to advances and breakthroughs regarding the mastery of direct extrusion
processes with polymer pellets in distinct printing positions, final extruded filament geometry,
improved planar adhesion between strip and layer faces, and shorter extrusion time in medium
and large formate 3D printing.