info:eu-repo/semantics/article
R&R study of natural frequencies in wood of Spathodea campanulata, Fraxinus americana and Albizia Plurijuga
Estudio R&R de frecuencias naturales en madera de S. campanulata, F. americana y A. Plurijuga.
Registro en:
10.15517/mym.v12i0.48817
Autor
Sotomayor-Castellanos, Javier-Ramón
Sosa Villanueva, Héctor Manuel
Institución
Resumen
The objective of the research was to carry out a repeatability and reproducibility study in representative samples of small wooden specimens from Spathodea campanulata, Fraxinus americana and Albizia Plurijuga. The experimental strategy assumes two stages. The first consisted of the analysis of the results of the frequencies measured in the three angiosperm species. Its objective was to validate the homogeneity and representativeness of the woods under study. The second stage was oriented to the study of the variations of the frequency results. Its objective was to build repeatability and reproducibility tables and their analysis of variance. A completely randomized and balanced design was prepared. The experimental unit consisted of three homogeneous groups of 40 test tubes of each species. For each species studied, crossover repeatability and reproducibility studies were carried out. The results indicate that for S. campanulata, 97.7% of the total variance is due to the instrument while 2.3% to differences between operators; for F. americana, 99.2% of the total variance is due to the instrument and 0.8% to differences between operators, while for A. plurijuga, 100% of the total variance is due to the instrument while there is no variability due to differences between operators. El objetivo de la investigación fue realizar un estudio de repetibilidad y reproducibilidad en muestras representativas de probetas de madera de pequeñas dimensiones de Spathodea campanulata, Fraxinus americana y Albizia Plurijuga. La estrategia experimental asume dos etapas. La primera consistió en el análisis de los resultados de las frecuencias medidas en las tres especies angiospermas. Su objetivo fue validar la homogeneidad y la representatividad de las maderas en estudio. La segunda etapa se orientó al estudio de las variaciones de los resultados de las frecuencias. Su objetivo fue construir tablas de repetibilidad y reproducibilidad y de su análisis de varianza. Se preparó un diseño completamente al azar y balanceado. La unidad experimental consistió en tres grupos homogéneos de 40 probetas de cada especie. Para cada especie estudiada se realizaron estudios cruzados de repetibilidad y reproducibilidad. Los resultados indican que para S. campanulata, el 97,7% de la varianza total se debe al instrumento en tanto que el 2,3% a diferencias entre operadores; para F. americana, el 99,2% de la varianza total se debe al instrumento y el 0,8% a diferencias entre operadores, mientras que para A. plurijuga, el 100% de la varianza total se debe al instrumento en tanto que no existe variabilidad debida a diferencias entre operadores.