info:eu-repo/semantics/bachelorThesis
Diseño e implementación de manual de buenas prácticas de manufactura para la planta de producción de empaques de alimentos de la Empresa “Productos Paraíso del Ecuador S.A.”, sede Tambillo
Fecha
2022-07-25Registro en:
Romero Pazmiño, Luis Eduardo. (2022). Diseño e implementación de manual de buenas prácticas de manufactura para la planta de producción de empaques de alimentos de la Empresa “Productos Paraíso del Ecuador S.A.”, sede Tambillo. Escuela Superior Politécnica de Chimborazo. Riobamba.
Autor
Romero Pazmiño, Luis Eduardo
Resumen
The objetive of this project is the elaboration of a GMP manual according to the current
regulations in Ecuador base don resolution 067 of ARCSA, and its implementation in the flexible
packaging factory for food of the company “Productos Paraíso del Ecuador S.A.” Tambillo office,
for which it was composed of six phases: Phase I was the search for an instrument to measure
GMP compliance within the factory, being chosen a check list used by ARCSA; Phase II focused
on an evaluayion using the check list, which gave a result of 72% of initial compliance; Phase III
was the development of documentation such as manual, procedures, instructions and records,
these documents were the remedial actions for non-compliance found during pashe II; Phase IV
consisted of the delivery of the manual and its documentation to the factory workers through a
socialization; Phase V included the implementation of the manual and its procedures within the
factory; Phase VI was considered as the final stage, using the same check list of Phase II, an
evaluation was carried out with a 90% compliance level. For the final result, the level of
compliance of phase II as the initial state and phase VI of the final stage were compared, and an
increase of 18% was obtained. It is concluded that the development of the GMP manual and its
implementation within the plant contributed to the level of compliance under ARCSA Resolution
067. It is recommend to implement corrective actions in the long term, and to implement
regulations superior to the GMP, since this will allow a stronger entry into the international
market.