Artículos de revistas
Ambipolar transport in tin dioxide thin film transistors promoted by PCBM fullerene
Fecha
2018-12-01Registro en:
Journal of Materials Science: Materials in Electronics, v. 29, n. 23, p. 20010-20016, 2018.
1573-482X
0957-4522
10.1007/s10854-018-0131-9
2-s2.0-85054807144
Autor
Universidade Federal de Santa Catarina (UFSC)
Universidade Estadual Paulista (Unesp)
University of Western Ontario
Institución
Resumen
In this article, the effect of phenyl-C61-butyric acid methyl ester (PCBM) layer on the electrical performance of field-effect transistors (FETs) based on antimony-doped tin dioxide (Sb:SnO2) is reported. PCBM is a soluble variety of fullerene, n-type organic semiconductor, known to promote the p-type doping of semiconducting materials such as diamond and graphene, via charge transfer. Sb:SnO2 is an emerging low-cost transparent oxide semiconductor material that exhibits strong unipolar behavior (n-type). Ambipolar character in tin dioxide normally is not observed, however in this study we find that the deposition of PCBM on top of Sb:SnO2 promotes ambipolar behavior in Sb:SnO2 FETs. At negative gate bias (VG < 0) PCBM traps free electrons from the conduction band of SnO2 and from Sb donors, thus downshifting the Sb:SnO2 Fermi level (EF), leading to a strong injection of holes in the valence band of Sb:SnO2. The p-type carrier concentration increases up to 8.6 × 1011 cm−2. Our results suggest that PCBM deposition decreases the current in the accumulation mode of electrons due to electron mobility decrease at VG > 0, and enhances the current in inversion mode. Besides, PCBM deposition also results in an increase of hole mobility at VG < 0.