dc.contributorCarneiro, Eric Brandão
dc.contributorhttp://lattes.cnpq.br/2876372207029481
dc.contributorGomes, Marcio Henrique de Avelar
dc.contributorhttp://lattes.cnpq.br/6090334823327910
dc.contributorMelo, Viviane Suzey Gomes de
dc.contributorhttp://lattes.cnpq.br/5640661336499240
dc.creatorRussi, Dyhonatan Willian
dc.date.accessioned2021-09-15T03:52:12Z
dc.date.accessioned2022-10-07T22:31:13Z
dc.date.available2021-09-15T03:52:12Z
dc.date.available2022-10-07T22:31:13Z
dc.date.created2021-09-15T03:52:12Z
dc.date.issued2020-08-31
dc.identifierhttp://repositorio.ufsm.br/handle/1/22219
dc.identifier.urihttp://repositorioslatinoamericanos.uchile.cl/handle/2250/4037483
dc.description.abstractChoosing the correct analysis methodology to study and design acoustic behavior at low fre- quencies, considering small non-rectangular rooms and critical listening rooms, can influence the auditory sensations that the user of the room will have when making use of the space. This research compares two methodologies that analyze low frequencies in small scale models, of possible rectangular and non-rectangular shapes, of acoustic rooms. Comparisons are made between the parameters T20, T30, EDT, C80, D50 and Ts, obtained in computational models that make use of the finite element method (FEM) and analytical calculation models that make use of the equations that describe the acoustic behavior of rectangular rooms with rigid walls. This research also evaluated, through Pearson’s correlation coefficient r, the similarity between the decay curves, in the form of the inverted cumulative integrals of the impulse responses (ICI), evaluated the similarity between the frequency response functions (FRF) and evaluated the si- milarity between the impulse responses (IR), obtained with these evaluation methodologies. The results indicate that the less rectangular the shape of the room is, smaller will be the simi- larity between the impulse responses obtained in the methodologies. This fact can influence, for example, the acoustic perception in a non-rectangular room designed using analytical mo- dels for rectangular rooms. The methodologies used in this research were validated with the measurement of a physical model built on a small scale, after identifying the convergence of results between the data obtained in the measurements, in the virtual models in FEM and in the analytical ones. All geometric shapes, of the possible acoustic rooms, were elaborated on a reduced scale, with a reduction ratio of (1: 8). The data obtained in these measurements were used as input data for other analyzes made by this research.
dc.publisherUniversidade Federal de Santa Maria
dc.publisherBrasil
dc.publisherEngenharia Civil
dc.publisherUFSM
dc.publisherPrograma de Pós-Graduação em Engenharia Civil
dc.publisherCentro de Tecnologia
dc.rightshttp://creativecommons.org/licenses/by-nc-nd/4.0/
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 International
dc.subjectBaixas frequências
dc.subjectAcústica modal
dc.subjectSalas não retangulares
dc.subjectModelos escala reduzida
dc.subjectCoeficiente de correlação
dc.subjectLow frequencies
dc.subjectModal acoustics
dc.subjectNon-rectangular rooms
dc.subjectReduced scale models
dc.subjectCorrelation
dc.titleCaracterização acústica em baixas frequências de modelos retangulares e não retangulares de salas em escala reduzida
dc.typeDissertação


Este ítem pertenece a la siguiente institución