Artigo
Changes on iron electrode surface during hydrogen permeation in borate buffer solution
Fecha
2008-04-01Registro en:
Electrochimica Acta. Oxford: Pergamon-Elsevier B.V. Ltd, v. 53, n. 10, p. 3670-3679, 2008.
0013-4686
10.1016/j.electacta.2007.11.077
WOS:000254354300014
2797127887030838
Autor
Universidade Federal do Rio de Janeiro (UFRJ)
Universidade Estadual Paulista (Unesp)
Universidade de São Paulo (USP)
CNRS
Resumen
Hydrogen interaction with oxide films grown on iron electrodes at open circuit potential (E-oc) and in the passive region (+0.30 V-ECS) was studied by chronopotentiometry, chronoamperometry and electrochemical impedance spectroscopy techniques. The results were obtained in deaerated 0.3 mol L-1 H3BO3 + 0.075 mol L-1 Na2B4O7 (BB, pH 8.4) solution before, during and after hydrogen permeation. The iron oxide film modification was also investigated by means of in situ X-ray absorption near-edge spectroscopy (XANES) and scanning electrochemical microscopy (SECM) before and during hydrogen permeation. The main conclusion was that the passive film is reduced during the hydrogen diffusion. The hydrogen permeation stabilizes the iron surface at a potential close to the thermodynamic water stability line where hydrogen evolution can occur. The stationary condition required for the determination of the permeation parameters cannot be easily attained on iron surface during hydrogen permeation. Moreover, additional attention must be paid when obtaining the transport parameters using the classical permeation cell. (c) 2007 Elsevier Ltd. All rights reserved.