Colombia
| Trabajo de grado - Pregrado
Sistema distribuido de captura y visualización de espectro para la banda ISM de 2.4 GHz
Fecha
2020-03-16Autor
Díaz Bravo, Jesús Adrian
Guarnizo García, Luis Gonzalo
Institución
Resumen
El presente trabajo aborda el diseño de un sistema distribuido de captura y
visualización de espectro para la banda ISM de 2.4 GHz, con la capacidad de
capturar el SSID, el RSSI y el canal de frecuencia de una red Wi-Fi para generar
reportes gráficos que permitan observar el funcionamiento de la red y aplicar
mejoras en caso de ser necesario. En primer lugar, para el desarrollo de este
proyecto se diseñaron cuatro nodos sensores capaces de recolectar las variables
de interés sobre la red. Luego, se implementó un servidor con el lenguaje de
programación Python que permitiera la recepción de la información y su posterior
visualización. Finalmente, se realizaron diferentes pruebas con el sistema de cuales
se encontró principalmente que es posible a partir de la información presentada por
los nodos en la interfaz de usuario; determinar si el lugar donde se encuentra
ubicado el router es el más indicado y si el nivel de interferencia en el canal donde
se configuró la red afecta de forma significativa la tasa de transmisión de datos This paper is about the design of a distributed spectrum capture and display system
for the 2.4 GHz ISM band, with the ability to capture the SSID, RSSI and frequency
channel of a Wi-Fi network to generate graphic reports that allow to observe the
operation of the network and apply improvements if necessary. In the first place, four
sensor nodes capable of collecting the variables of interest on the network were
designed for the development of this project. Then, a server was implemented with
the Python programming language that allowed the reception of the information and
its subsequent visualization. Finally, they carried out different tests with the system
of which it was found mainly that it is possible from the information presented by the
nodes in the user interface to determine if the place where the router is located is
the most indicated and if the level of channel interference where the network was
configured significantly affects the data transmission rate