dc.contributorNational Laboratory of Civil Engineering (LNEC)
dc.contributorNew University of Lisbon (FCT-UNL)
dc.contributorTechnical University of Lisbon
dc.contributorUniversidade Estadual Paulista (Unesp)
dc.date.accessioned2014-05-27T11:26:12Z
dc.date.available2014-05-27T11:26:12Z
dc.date.created2014-05-27T11:26:12Z
dc.date.issued2011-12-01
dc.identifierMARINE 2011 - Computational Methods in Marine Engineering IV, p. 134-145.
dc.identifierhttp://hdl.handle.net/11449/72826
dc.identifier2-s2.0-84860247274
dc.identifier2-s2.0-84860247274.pdf
dc.description.abstractNumerical modeling of the interaction among waves and coastal structures is a challenge due to the many nonlinear phenomena involved, such as, wave propagation, wave transformation with water depth, interaction among incident and reflected waves, run-up / run-down and wave overtopping. Numerical models based on Lagrangian formulation, like SPH (Smoothed Particle Hydrodynamics), allow simulating complex free surface flows. The validation of these numerical models is essential, but comparing numerical results with experimental data is not an easy task. In the present paper, two SPH numerical models, SPHysics LNEC and SPH UNESP, are validated comparing the numerical results of waves interacting with a vertical breakwater, with data obtained in physical model tests made in one of the LNEC's flume. To achieve this validation, the experimental set-up is determined to be compatible with the Characteristics of the numerical models. Therefore, the flume dimensions are exactly the same for numerical and physical model and incident wave characteristics are identical, which allows determining the accuracy of the numerical models, particularly regarding two complex phenomena: wave-breaking and impact loads on the breakwater. It is shown that partial renormalization, i.e. renormalization applied only for particles near the structure, seems to be a promising compromise and an original method that allows simultaneously propagating waves, without diffusion, and modeling accurately the pressure field near the structure.
dc.languageeng
dc.relationMARINE 2011 - Computational Methods in Marine Engineering IV
dc.rightsAcesso aberto
dc.sourceScopus
dc.subjectImpact loads
dc.subjectSph - Smoothed Particle Hydrodynamics
dc.subjectVertical breakwater
dc.subjectWave-structure interaction
dc.subjectCoastal structures
dc.subjectExperimental data
dc.subjectExperimental setup
dc.subjectFree-surface flow
dc.subjectIncident waves
dc.subjectLagrangian
dc.subjectLagrangian formulations
dc.subjectNon-linear phenomena
dc.subjectNumerical modeling
dc.subjectNumerical results
dc.subjectPhysical model
dc.subjectPhysical model test
dc.subjectPressure field
dc.subjectReflected waves
dc.subjectRenormalization
dc.subjectSmoothed particle hydrodynamics
dc.subjectWater depth
dc.subjectWave overtoppings
dc.subjectWave transformations
dc.subjectWavebreaking
dc.subjectBreakwaters
dc.subjectComputational methods
dc.subjectComputer simulation
dc.subjectHydrodynamics
dc.subjectLagrange multipliers
dc.subjectMarine engineering
dc.subjectNumerical models
dc.subjectUnderwater foundations
dc.subjectWave transmission
dc.subjectCoastal engineering
dc.titleInteraction between wave and coastal structure: Validation of two lagrangian numerical models with experimental results marine 2011
dc.typeActas de congresos


Este ítem pertenece a la siguiente institución