The steady-state heat transfer in laminar flow of liquid egg yolk-an important pseudoplastic fluid food-in circular and concentric annular ducts was experimentally investigated. The average convection heat transfer coefficients, determined by measuring temperatures before and after heating sections with constant temperatures at the tube wall, were used to obtain simple new empirical expressions to estimate the Nusselt numbers for fully established flows at the thermal entrance of the considered geometries. The comparisons with existing correlations for Newtonian and non-Newtonian fluids resulted in excellent agreement. The main contribution of this work is to supply practical and easily applicable correlations, which are, especially for the case of annulus, rather scarce and extensively required in the design of heat transfer operations dealing with similar shear-thinning products. In addition, the experimental results may support existing theoretical analyses.262287298Barletta, A., Combined forced and free flow of a power-law fluid in a vertical annular duct (2000) International Journal of Heat and Mass Transfer, 43 (19), p. 3673Barletta, A., Fully developed laminar forced convection in circular ducts for power-law fluids with viscous dissipation (1997) International Journal of Heat and Mass Transfer, 40 (1), p. 15Barletta, A., Lazzari, S., Forced and free flow in a vertical annular duct under nonaxisymmetric conditions (2005) Journal of Heat Transfer-Transactions of the ASME, 127 (6), p. 606Barletta, A., Lazzari, S., Zanchini, E., Convection in a vertical annular duct with circumferentially variable boundary conditions (2004) Journal of Thermophysics and Heat Transfer, 18 (4), p. 563Bassett, C.E., Welty, J.R., Non-Newtonian heat-transfer in thermal entrance region of uniformly heated, horizontal pipes (1975) Aiche Journal, 21 (4), p. 699Batra, R.L., Sudarsan, V.R., Laminar-flow heat-transfer in the entrance region of concentric annuli for power law fluids (1992) Computer Methods In Applied Mechanics and Engineering, 95 (1), p. 1Bilir, S., Numerical-solution of graetz problem with axial conduction (1992) Numerical Heat Transfer Part A-Applications, 21 (4), p. 493Bird, R.B., Armstrong, R.C., Hassager, O., (1977) Dynamics of polymeric liquids, , John Wiley & Sons, New YorkBird, R.B., Stewart, W.E., Lightfoot, E.N., (2002) Transport Phenomena, , Second Ed, John Wiley & Sons, New YorkCarezzato, A., Alcantara, M.R., Telis-Romero, J., Tadini, C.C., Gut, J.A.W., Non-Newtonian heat transfer on a plate heat exchanger with generalized configurations (2007) Chemical Engineering Technology, 30 (1), p. 21Capobianchi, M., Irvine, T.F., Predictions of pressure-drop and heat-transfer in concentric annular ducts with modified power law fluids (1992) Warme Und Stoffubertragung-Thermo And Fluid Dynamics, 27 (4), p. 209Cheng, K.C., Hwang, G.J., Laminar forced convection in eccentric annuli (1968) Aiche Journal, 14 (3), p. 510Childs, P.R.N., Long, C.A., A review of forced convective heat transfer in stationary and rotating annuli (1996) Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 210 (2), p. 123Cho, Y.I., Hartnett, J.P., Non-newtonian fluids in circular pipe flow (1982) Advances in heat transfer, p. 59. , Academic Press, pChristiansen, E.B., Craig, S.E., Heat transfer to pseudoplastic fluids in laminar flow (1962) Aiche Journal, 8 (2), p. 154Cotta, R.M., Ozisik, M.N., Laminar forced-convection of power-law non-Newtonian fluids inside ducts (1986) Warme Und Stoffubertragung-Thermo and Fluid Dynamics, 20 (3), p. 211Cotta, R.M., Ozisik, M.N., Laminar forced-convection to non-Newtonian fluids in ducts with prescribed wall heat-flux (1986) International Communications in Heat and Mass Transfer, 13 (3), p. 325El-Shaarawi, M.A.I., Abualhamayel, H.I., Mokheimer, E.M.A., Developing laminar forced convection in eccentric annuli (1998) Heat and Mass Transfer, 33 (5-6), p. 353Fontes, S.R., Gasparetto, C.A., Convective laminar flow of food additives solutions in circular entrance region (2001) International Communications in Heat and Mass Transfer, 25 (5), p. 693Forrest, G., Wilkinson, W. L. Laminar heat transfer to power law fluids in tubes with constant wall temperature, Transactions of the Institute of Chemical Engineers, 51, 331 (1973). Gabas, A. L., Menegalli, F. C., Ferrari, F., Telis-Romero, J. Influence of drying conditions on the rheological properties of prunes, Drying Technology, 20, No. 7, 1485 (2002)Gori, F., Effects of variable physical-properties in laminar-flow of pseudoplastic fluids (1978) International Journal of Heat and Mass Transfer, 21 (2), p. 247Gut, J.A.W., Pinto, J.M., Gabas, A.L., Telis-Romero, J., Continuous pasteurization of egg yolk: Thermophysical properties and process simulation (2005) Journal of Food Process Engineering, 28, p. 181Hong, S.N., Matthews, J.C., Heat transfer to non-Newtonian fluids in laminar flow through concentric annuli (1969) International Journal of Heat and Mass Transfer, 12 (12), p. 1699Jakob, M., (1949) Heat transfer, , John Wiley & Sons, New YorkJoshi, S.D., Bergles, A.E., (1982) Heat transfer to laminar flow of non-Newtonian pseudoplastic fluids in tubes, Heat transfer, p. 51. , Hemisphere, Washington, DC, pKays, W.M.M., Crawford, E., (1993) Convective heat and mass transfer, , Third ed, McGrawHill, New YorkKhellaf, K., Lauriat, G., A new analytical solution for heat transfer in the entrance region of ducts: Hydrodynamically developed flows of power-law fluids with constant wall temperature (1997) International Journal of Heat and Mass Transfer, 40 (14), p. 3443Krishnan, K.N., Sastri, V.M.K., Numerical-solution of thermal entry length problem with variable viscosities and viscous dissipation (1978) Warme Und Stoffubertragung-Thermo And Fluid Dynamics, 11 (2), p. 73Lawal, A., Mujumdar, A.S., Extended Graetz problem-a comparison of various solution techniques (1985) Chemical Engineering Communications, 39 (1-6), p. 91Lawal, A., Mujumdar, A.S., Viscous dissipation effects on thermal entrance heat-transfer to power law fluids in arbitrary cross-sectional ducts (1989) Chemical Engineering Journal and the Biochemical Engineering Journal, 41 (2), p. 57Levenspield, O., (1993) Engineering Flow and Heat Exchange, , Plenum Press, New YorkLundberg, R.E., Mccuen, P.A., Reynolds, W.C., Heat transfer in annular passages. Hydrodynamically developed laminar flow with arbitrarily prescribed wall temperatures or heat fluxes (1963) International Journal of Heat and Mass Transfer, 6, p. 495Lyche, B.C., Bird, R.B., The Graetz-Nusselt problem for a power-law non-Newtonian fluid (1956) Chemical Engineering Science, 6 (1), p. 35Mahalingam, R., Tilton, L.O., Coulson, J.M., Heat-transfer in laminar-flow of non-Newtonian fluids (1975) Chemical Engineering Science, 30 (8), p. 921Manglik, R.M., Fang, P.P., Effect of eccentricity and thermal-boundary conditions on laminar fully-developed flow in annular ducts (1995) International Journal of Heat and Fluid Flow, 16 (4), p. 298Manglik, R.M., Fang, P., Thermal processing of viscous non-Newtonian fluids in annular ducts: Effects of power-law rheology, duct eccentricity, and thermal boundary conditions (2002) International Journal of Heat and Mass Transfer, 45 (4), p. 803Manglik, R.M., Prusa, J., Viscous dissipation in non-Newtonian flows-implications for the nusselt number (1995) Journal of Thermophysics and Heat Transfer, 9 (4), p. 733Mansour, A.R., An analytical solution of laminar heat-transfer to power-law non-Newtonian fluids in circular ducts Graetz-Nusselt problem (1989) International Communications in Heat and Mass Transfer, 16 (2), p. 199Matlab. 2001, The MathWorks Inc.: USA. Metzner, A. B., Gluck, D. F. Heat transfer to non-Newtonian fluids under laminar flow conditions, Chemical Engineering Science, 12, No. 3, 185 (1960)Metzner, A.B., Vaughn, R.D., Houghton, G.L., Heat transfer to non-Newtonian fluids (1957) Aiche Journal, 3 (1), p. 92Moghadam, H., Aung, W., Numerical method for laminar convection in a concentric vertical annular duct with variable properties (1990) Numerical Heat Transfer, 18 A, p. 357Nonino, C., Delgiudice, S., Finite element analysis of laminar mixed convection in the entrance region of horizontal annular ducts (1996) Numerical Heat Transfer Part A-Applications, 29 (3), p. 313Nouar, C., Benaouda-Zouaoui, B., Desaubry, C., Laminar mixed convection in a horizontal annular duct. Case of thermodependent non-Newtonian fluid (2000) European Journal of Mechanics B-Fluids, 19 (3), p. 423Olek, S., Heat transfer in duct flow of non-Newtonian fluids with axial conduction (1998) International Communications in Heat and Mass Transfer, 25 (7), p. 929Oliver, D.R., Jenson, V.G., Heat transfer to pseudoplastic fluids in laminar flow in horizontal tubes (1964) Chemical Engineering Science, 19 (2), p. 115Pigford, R.L., Nonisothermal flow and heat transfer inside vertical tubes (1955) Chemical Engineering Progress Symposium Series, 51 (17), p. 79Polizelli, M.A., Menegalli, F.C., Telis, V.R.N., Telis-Romero, J., Friction Losses in Valves and Fittings for Power-Law Fluids (2003) Brazilian Journal of Chemical Engineering, 20 (4), p. 455Popovska, F.W., Wilkinson, L., Laminar heat-transfer to Newtonian and non-Newtonian fluids in tubes (1977) Chemical Engineering Science, 32 (10), p. 1155Prusa, J., Manglik, R.M., Asymptotic and numerical-solutions for thermally developing flows of Newtonian and non-Newtonian fluids in circular tubes with uniform wall temperature (1994) Numerical Heat Transfer Part a-Applications, 26 (2), p. 199Ramachandran, P.A., Boundary integral solution method for the Graetz problem (1993) Numerical Heat Transfer Part B-Fundamentals, 23 (2), p. 257Richardson, S.M., Extended leveque solutions for flows of power law fluids in pipes and channels (1979) International Journal of Heat and Mass Transfer, 22 (10), p. 1417Rodriguezluna, G., Segurajauregui, J.S., Torres, J., Brito, E., Heat-transfer to non-Newtonian fluid foods under laminar-flow conditions in horizontal tubes (1987) Journal of Food Science, 52 (4), p. 975Rokerya, M.S., Iqbal, M., Effects of viscous dissipation on combined free and forced convection through vertical concentric annuli (1971) International Journal of Heat and Mass Transfer, 14 (3), p. 491Sannervik, J., Bolmstedt, U., Tragardh, C., Heat transfer in tubular heat exchangers for particulate containing liquid foods (1996) Journal of Food Engineering, 29 (1), p. 63Shah, R. K., Bhatti, M. S. Laminar convective heat transfer in ducts, in: S. akaç, R. K. Shah, W. Aung (Eds.), Handbook of single-phase convective heat transfer, John Wiley & Sons, New York, p. 3.1-3.137 (1987)Shah, R.K., London, A.L., (1978) Laminar flow forced convection in ducts, , Academic Press, New YorkShih, Y.P., Tsou, J.D., Extended leveque solutions for heat-transfer to power law fluids in laminar-flow in a pipe (1978) Chemical Engineering Journal and the Biochemical Engineering Journal, 15 (1), p. 55Sieder, E.N., Tate, G.E., Heat transfer and pressure drop of liquids in tubes (1936) Industrial and Engineering Chemistry, 28, p. 1429Skelland, A.H., Asymptotic rates of heat or mass transfer in non-Newtonian laminar flow (1967) Industrial & Engineering Chemistry Fundamentals, 6 (1), p. 148Tanaka, M., Mitsuishi, N., Non-Newtonian laminar heat transfer in concentric annuli (1975) Heat Transfer Japanese Research, 4, p. 26Telis-Romero, J., Cabral, R.A.F., Gabas, A.L., Telis, V.R.N., Rheological properties and fluid dynamics of coffee extract (2001) Journal of Food Process Engineering, 24 (4), p. 217Telis-Romero, J.T., Polizelli, M.A., Gabas, A.L., Telis, V.R.N., Friction Losses in Valves and Fittings for Viscoplastics Fluids (2005) Canadian Journal of Chemical Engineering, 83, p. 181Telis-Romero, J., Thomaz, C.E.P., Bernardi, M., Telis, V.R.N., Gabas, A.L., Rheological properties and fluid dynamics of egg yolk (2006) Journal of Food Engineering, 74, p. 191Trombetta, M.L., Laminar forced convection in eccentric annuli (1971) International Journal of Heat and Mass Transfer, 14 (8), p. 1161Vick, B., Ozisik, M.N., Effects of axial conduction and convective boundary-conditions in slug flow inside a circular tube (1981) Journal of Heat Transfer-Transactions of the Asme, 103 (3), p. 436