Terpolymers of L-lactide, D,L-lactide and trimethylene carbonate (TMC) were synthesized via the ring-opening polymerization reaction for cyclic monomers using stannous octoate as the initiator at a ratio of ~0.05 mol% (monomers/(SnOct)2). Synthesis was done at 130 °C for 48 h. The inclusion of TMC, an aliphatic elastomeric polycarbonate, alongside polymer chain segments containing L-lactide and D,L-lactide, was expected to yield a material with improved properties such as increased elongation; this would overcome the limitation of copolymers consisting entirely of lactide and D,L-lactide. The terpolymer properties were assessed by Nuclear magnetic resonance spectroscopy 1H and 13C NMR, infrared spectroscopy, differential scanning calorimetry and thermogravimetry, with particular attention being given to the effect of TMC on the copolymer of L-lactide-co-D,L-lactide. The mixing of these polymers resulted in material with a high molar mass (105 g/mol). The mechanical properties of the terpolymer were assessed using pins of this material that were tested by mechanical flexion at three points. When compared with results for the copolymer PLDLA there was a decrease in Young's modulus for the TMC-containing terpolymer.173619626Davachi, S.M., Kaffashi, B., Roushandeh, J.M., Torabinejad, B., Investigating thermal degradation, crystallization and surface behavior of l-lactide, glycolide and trimethylene Carbonate terpolymers used for medical applications (2012) Materials Science and Engineering C, 32, pp. 98-104. , http://dx.doi.org/10.1016/j.msec.2011.10.001Zurita, A., Puiggali, J., Franco, L., Rodriguez-Galan, A., Copolymerization of glycolide and trimethylene Carbonate (2006) Journal of Polymer Science Part A: Polymer Chemistry, 44 (2), pp. 993-1013. , http://dx.doi.org/10.1002/pola.21199Pěgo, A.P., Siebum, B., Grijpma, D., Preparation of degradable porous structures based on 1,3-trimethylene Carbonate and d,l-lactide (co)polymers for heart tissue engineering (2003) Tissue Engineering, 9, pp. 981-993. , http://dx.doi.org/10.1089/107632703322495628, PMid:14633382Celorio, E.D., Franco, L., Gala, A.R., Puiggali, J., Preparation of degradable porous structures based on 1,3-trimethylene Carbonate and d,l-lactide (co)polymers for heart tissue engineering (2012) European Polymer Journal, 48, pp. 60-73. , http://dx.doi.org/10.1016/j.eurpolymj.2011.10.014Stock, U.A., Vacanti, J.P., Tissue engineering: Current state and prospects (2001) Annual Review of Medicine, 52, p. 443. , http://dx.doi.org/10.1146/annurev.med.52.1.443, PMid:11160788Wang, Y., Bella, E., Lee, C.S., Migliaresi, C., Pelcastre, L., Schwartz, Z., The synergistic effects of 3-d porous silk fibroin matrix scaffold properties and hydrodynamic environment in Cartilage tissue regeneration (2010) Biomaterials, 31 (17), pp. 4672-4681. , http://dx.doi.org/10.1016/j.biomaterials.2010.02.006, PMid:20303584Ciambelli, G.S., Perez, M.O., Siqueira, G.V., Candella, M.A., Motta, A.C., Duarte, M.A., Characterization of poly (l-co-d,l lactic acid) and a study of polymer-tissue interaction in subcutaneous implants in wistar rats (2013) Materials Research, 16, pp. 28-37. , http://dx.doi.org/10.1590/S1516-14392012005000146Messias, A.D., Lucchesi, C., Coraça-Huber, D.C., Pavani Filho, A., Duek, E.A.R., Lithograph-moulded poly-l-co-d,l lactide porous membranes for osteoblastic culture (2014) Materials Research, 17 (1), pp. 7-15. , http://dx.doi.org/10.1590/S1516-14392013005000156Stares, S.L., Boehs, L., Fredel, M.C., Aragoněs, A., Duek, E.A.R., Self-reinforced bioresorbable polymer p (l/dl) la 70:30 for the manufacture of craniofacial implant (2012) Polímeros, 22, pp. 378-383. , http://dx.doi.org/10.1590/S0104-14282012005000056Baraúna, G., Coraça-Huber, D.C., Duek, E.A.R., In vitro degradation of poly-l-co-d, l-lactic acid membranes (2012) Materials Research, 16, pp. 221-226. , http://dx.doi.org/10.1590/S1516-14392012005000154Motta, A.C., Duek, E.A.R., Síntese Caracterização e degradação in vitro do poli(lácido lático-co-d,l ácido glicólico (2006) Matéria, 11 (3), pp. 340-350. , http://dx.doi.org/10.1590/S1517-70762006000300024Baraúna, G.S., Pierucci, A., Oliveira, A., Duarte, M.A.T., Duek, E.A.R., Estudo da degradação in vivo" de poli(l-co-d,l- Ácido láctico) aplicado como prótese para regeneração nervosa periférica (2007) Matéria, 12, pp. 298-306. , http://dx.doi.org/10.1590/S1517-70762007000200008Motta, A.C., Duek, E.A.R., Síntese e Caracterização do copolímero poli (l-co-d,l ácido láctico (2007) Polímeros, 17, pp. 123-129. , http://dx.doi.org/10.1590/S0104-14282007000200011Motta, A.C., Síntese Caracterização de dispositivos de poli(l-co-dl ácido lático). Estudo da degradação in vitro" e "in vivo". [tese] (2007) Campinas, , Universidade Estadual de CampinasKim, J.K., Lee, J.H., Preparation and chain-extension of p(lla-b-tmc-b-lla) triblock copolymers and their elastomeric properties (2002) Macromolecular Research, 10 (2), pp. 54-59. , http://dx.doi.org/10.1007/BF03218290Engelberg, I., Kohn, J., Physico-mechanical properties of degradable polymers used in medical applications: A comparative study (1991) Biomaterials, 12 (3), pp. 292-304. , http://dx.doi.org/10.1016/0142-961291)90037-BMiddeleton, J.C., Tipton, A.J., Physico-mechanical properties of degradable polymers used in medical applications: A comparative study (2000) Biomaterials, 21, pp. 2335-2346. , http://dx.doi.org/10.1016/S0142-9612(0000101-0Krasowska, K., Heimowska, A., Rutkowska, M., Enzymatic and hydrolytic degradation of poly (-caprolactone) in natural environment (2006) Polimery, 51, pp. 21-26Buchholz, B., Analysis and characterization of resorbable dl-lactide-trimethylene Carbonate copolyesters (1993) Journal of Materials Science: Materials in Medicine, 4, pp. 381-388. , http://dx.doi.org/10.1007/BF00122196Matsumura, S., Tsukada, K., Toshima, K., Novel lipase-catalyzed ring-opening copolymerization of lactide and trimethylene Carbonate forming poly(ester Carbonate)s (1999) International Journal of Biological Macromolecules, 25 (1-3), pp. 161-167. , http://dx.doi.org/10.1016/S0141-8130(9900030-6Grijpma, D.W., Pennings, A.J., Co polymers of L-lactide Synthesis thermal properties and hydrolytic degradation (1994) Macromolecular Chemistry and Physics, 195, p. 1633. , http://dx.doi.org/10.1002/macp.1994.021950515Storey, R.F., Hickey, T.P., Methacrylate-endcapped poly(d,l-lactide-co-trimethylene Carbonate) oligomers. Network formation by thermal free-radical curing (1997) Polymer, 38, pp. 6295-6301. , http://dx.doi.org/10.1016/S0032-3861(9700208-5Paturej, M., Fray, M.E., Syntheses of new poly(ester-carbonate-urethane)s based on trimethylene Carbonate (tmc) and polyester polyol derived from dimerized fatty acid (2009) Polimery, 54, pp. 610-617Shen, Y., Shen, Z., Zhang, Y., Yao, K., Novel rare earth Catalysts for the living polymerization and block copolymerization of β-caprolactone (1996) Macromolecules, 29, pp. 8289-8295. , http://dx.doi.org/10.1021/ma9518060Albertsson, A.C., Liu, Y., Comparison between physical blending and copolymerization of poly(trimethylene Carbonate) and poly(adipic anhydride) with special regard to compatibility, morphology, and degradation (1997) Journal of Macromolecular Science: Pure and Applied Chemistry, A34 (8), pp. 1457-1482. , http://dx.doi.org/10.1080/10601329708011056Nomura, R., Kori, M., Matsuda, H., Copolymerization of cyclic imines and cyclic Carbonates in the presence of triethylamine -phosphine or -stibine (1988) Macromolecular Chemistry and Physics, 9, pp. 739-742Jerome, C., Lecomte, P., Recent advances in the synthesis of aliphatic polyesters by ring-opening polymerization (2008) Advanced Drug Delivery Reviews, 60, pp. 1056-1076. , http://dx.doi.org/10.1016/j.addr.2008.02.008, PMid:18403043Albertsson, A.C., Varma, I.K., Recent developments in ring opening polymerization of lactones for biomedical applications (2003) Biomacromolecules, 4, pp. 1466-1486. , http://dx.doi.org/10.1021/bm034247a, PMid:14606869Fernandez, J., Etxeberria, A., Sarasua, J.R., Synthesis, structure and properties of poly(l-lactide-co-β- caprolactone) statistical copolymers (2012) Journal of the Mechanical Behavior of Biomedical Materials, 9, pp. 100-112. , http://dx.doi.org/10.1016/j.jmbbm.2012.01.003, PMid:22498288Oepen, V., Michaeli, W., Injection moulding of biodegradable implants (1992) Clinical Materials, 10, pp. 21-28. , http://dx.doi.org/10.1016/0267-660592)90080-DGogolewski, S., Jovanoviv, M., The effect of melt-processing on the degradation of selected polyhydroxyacids: Polylactides, polyhydroxybutyrate, and polyhydroxybutyrate-co- valerates (1993) Polymer Degradation and Stability, 40, pp. 313-322. , http://dx.doi.org/10.1016/0141-3910(9390137-8Raul, Z., Jordi, P., Alfonso, R.G., Triclosan release from coated polyglycolide threads (2006) Macromolecular Bioscience, 6, pp. 58-69. , http://dx.doi.org/10.1002/mabi.200500147, PMid:16374771Pospiech, D., Komber, H., Jehnichen, D., Multiblock copolymers of l-lactide and trimethylene Carbonate (2005) Biomacromolecules, 6, pp. 439-446. , http://dx.doi.org/10.1021/bm049393a, PMid:15638550Thakur, K., Kean, R., Hall, E., Kolstad, J., Lindgren, T., Doscotch, M., High-resolution 13c and 1h solution nmr study of poly(lactide (1997) Macromolecules, 30, p. 2422. , http://dx.doi.org/10.1021/ma9615967Okada, T., Imamura, Y., Matsuda, T., Polymerization of trimethylene Carbonate in aqueous solutions: Reaction mechanism and characterization (2010) Polymer Chemistry, pp. 1485-1492Ruckenstein, E., Yuan, Y., Molten ring-open copolymerization of l-lactide and cyclic trimethylene Carbonate (1998) Journal of Applied Sciene, 69, pp. 1429-1434. , http://dx.doi.org/10.1002/(SICI)1097-4628(19980815)6971429::AID-APP183.0. CO;2-OPěgo, A.P., (2002) Biodegradable Polymers Based on Trimethylene Carbonate for Tissue Engineering Applications, , [Dissertation]. Enschede: University of TwenteAlbertsson, A.C., Eklund, M., Synthesis of copolymers of 1,3-dioxan-2-one and oxepan-2-one using coordination Catalysts (1994) Journal of Polymer Science Part A: Polymer Chemistry, 32, pp. 265-279. , http://dx.doi.org/10.1002/pola.1994.080320207