A new method of damage determination in geothermal wells from geothermal inflow with application to Los Humeros, Mexico

dc.creatorAragón, A.
dc.creatorMoya, S. L.
dc.creatorGarcía-Gutiérrez, A.
dc.creatorArellano, V.
dc.date2010-01-25
dc.date.accessioned2018-03-16T15:55:21Z
dc.date.available2018-03-16T15:55:21Z
dc.identifierhttp://ojs.unam.mx/index.php/geofisica/article/view/40154
dc.identifier.urihttp://repositorioslatinoamericanos.uchile.cl/handle/2250/1203619
dc.descriptionSe presenta la obtención de curvas-tipo de influjo geotérmico para diferentes valores de daño, y se demuestra su aplicación en los análisis de producción de pozos geotérmicos determinando el daño en trece pozos del campo geotérmico de Los Humeros, Puebla, México. También se hicieron determinaciones de la permeabilidad en las zonas de producción de estos pozos y de sus respectivos índices de productividad. Se compararon los resultados del valor de daño obtenido con la metodología propuesta, con los valores de daño obtenidos a partir de pruebas de presión, encontrando que las diferencias máximas entre ambas técnicas es del orden de 0.7 unidades de daño. La presente metodología permite la caracterización del yacimiento a lo largo de su vida productiva a partir de las mediciones de las pruebas de producción efectuadas en los pozos. La metodología propuesta es innovadora porque anteriormente el daño solamente se podía determinar a partir de los análisis de las mediciones de la pruebas de presión.es-ES
dc.descriptionGeothermal inflow type curves were obtained for different values of well damage (i.e., inflow performance relationships). The method was evaluated by diagnosing the damage of thirteen producing wells in the Los Humeros, Puebla, México geothermal field. Permeability determinations were carried out for these wells and their productivity indices were estimated. Comparison of the diagnoses made via damage effects against the results of field pressure tests showed that the maximum difference between both approaches is on the order of 0.7 damage units. The methodology allows reservoir characterization along its productive life, since several production tests are carried out while the reservoir is producing. The data obtained from production tests are used to determine the damage effect and permeability of the rock formation. Previously the damage (skin factor) could only be determined from the analyses of transient pressure tests.en-US
dc.formatapplication/pdf
dc.languagespa
dc.publisherInstituto de Geofísicaes-ES
dc.relationhttp://ojs.unam.mx/index.php/geofisica/article/view/40154/36547
dc.sourceGeofísica Internacional; Vol 47, No 4 (2008)es-ES
dc.source0016-7169
dc.subjectRelaciones del comportamiento de influjo; pruebas de producción en pozos; factor de daño; yacimientos geotérmicos; curvas tipo; campo geotérmico Los Humeroses-ES
dc.subjectInflow performance relationships; well test production; skin damage effect; geothermal reservoir; type curves; Los Humeros geothermal fielden-US
dc.titleA new method of damage determination in geothermal wells from geothermal inflow with application to Los Humeros, Mexicoes-ES
dc.titleA new method of damage determination in geothermal wells from geothermal inflow with application to Los Humeros, Mexicoen-US
dc.typeArtículos de revistas
dc.typeArtículos de revistas


Este ítem pertenece a la siguiente institución