Buscar
Mostrando ítems 1-10 de 294
Cure Kinetic of Castor Oil-Based Polyurethane
(Wiley-Blackwell, 2011-12-05)
This research presents the kinetic studies on the cure reactions of a new material, castor oil-based polyurethane resin. Thermal analysis by isothermal differential scanning calorimetry was used, as a variety of factors ...
Cure Kinetic of Castor Oil-Based Polyurethane
(Wiley-Blackwell, 2011-12-05)
This research presents the kinetic studies on the cure reactions of a new material, castor oil-based polyurethane resin. Thermal analysis by isothermal differential scanning calorimetry was used, as a variety of factors ...
On the cure kinetics modeling of epoxy-anhydride systems used in glass reinforced pipe production
(Elsevier Science, 2013-10-08)
Aiming to determine a suitable model to describe the curing kinetics of a commercial epoxy/anhydride initiated by a quaternary amine system used for the production of glass reinforced pipes, calorimetric and infrared ...
Monitoring of cure kinetic prepreg and cure cycle modeling
(Springer, 2006-07-01)
Cure kinetic model is an integral part of composite process simulation, which is used to predict the degree of curing and the amount of the generated heat. The parameters involved in kinetic models are usually determined ...
Monitoring of cure kinetic prepreg and cure cycle modeling
(Springer, 2006-07-01)
Cure kinetic model is an integral part of composite process simulation, which is used to predict the degree of curing and the amount of the generated heat. The parameters involved in kinetic models are usually determined ...
Kinetic parameter estimation and simulation of pultrusion process of an epoxy-glass fiber system
(Elsevier B.V., 2020-08-01)
Pultrusion is a continuous process for manufacturing polymer composite with uniform cross-sectional profiles. In this process the pulling speed and die temperature are the main process variables that can be used to improve ...
Influence of phenoxy addition on the curing kinetics for uncatalyzed and catalized cyanate ester resin
(Wiley, 2010-09-03)
The curing behavior of the dicyanate ester of bisphenol-A (DCBA) modified with poly(hydroxy ether of bisphenol-A) (phenoxy) is studied by differential scanning calorimetry in dynamic and isothermal tests at temperatures ...
Cure kinetics and shrinkage model for epoxy-amine systems
(Elsevier, 2005-12)
Manufacture of most of epoxy resins implies that cure needs to be carried out under pressure. Due to the significance of knowing the influence of the pressure factor in cure kinetics, cure shrinkage of a stoichiometric ...
Dielectric thermal analysis as a tool for quantitative-evaluation of the viscosity and the kinetics of epoxy resin cure
(Institute of Electrical and Electronics Engineers (IEEE), 2006-06-01)
Dielectric thermal analysis has been proved as a valuable tool for monitoring the epoxy curing process and the related rheological properties in the fabrication of polymer-matrix composite materials. This technique also ...
Dielectric thermal analysis as a tool for quantitative-evaluation of the viscosity and the kinetics of epoxy resin cure
(Institute of Electrical and Electronics Engineers (IEEE), 2006-06-01)
Dielectric thermal analysis has been proved as a valuable tool for monitoring the epoxy curing process and the related rheological properties in the fabrication of polymer-matrix composite materials. This technique also ...