Buscar
Mostrando ítems 1-10 de 109
Desarrollo de un modelo computacional mediante elementos finitos del termoformado de gabinetes modelo RI-480
(2023)
The purpose of the development of the model is to propose a simulation for the thermoforming process of a SAMSUMG RT32K730SL model refrigerator cabinet for a home appliance company, through the use of ANSYS software as one ...
Estudio experimental y computacional mediante CFD Ansys del flujo de aire a través de techos de edificaciones usando un túnel de viento
(2015-03)
The document presents a computational and experimental analysis of wind flow speeds around of profiles ceilings of buildings of different geometries, with variations in the meshing and sensors located at different points ...
Uso y aplicaciones basicas de elementos finitos, usando el software ANSYS.
(Universidad de Talca (Chile). Escuela de Ingenieria Mecanica, 2004)
Implementación de algoritmos de optimización en el diseño de antenas planares
(2018-12)
This project presents the use of metaheuristic optimization algorithms specifically, Particle Swarm Optimization (PSO), Firefly Algorithm (FA) and Directional Bat Algorithm (dBA), applied in the design of planar antennas ...
Diseño de un vehículo aéreo no tripulado (UAV) para monitorear los recursos hídricos del Parque Nacional Cajas
(2021-10)
This project has established the design of a fixed-wing drone (UAV) to monitor the water resources of the Cajas National Park. Using ANSYS software with its Computational Fluid Dynamics (CFD) and Fluid-Solid (IFS) modules ...
Análisis matemático y simulación numérica del comportamiento de fluidos en un caldero pirotubular vertical
(2018)
The titled work was oriented to validate the results obtained in the experimentation with those processed in the simulation. The variable that was analyzed was the pressure, for which CFD software was used, and through the ...
Diseño, construcción e implementación de una grúa fija para trasladar personas con discapacidad en sus actividades en el baño
(2019-01)
This document shows the design of a device to transfer to people with disability in cleaning activities in the bathroom taking into account the restrictions, technical and mechanical characteristics, in addition to its ...
Construcción de un medio móvil para el frenómetro de cuatro placas Futur 2000 de la Universidad Politécnica Salesiana
(2021-02)
The technical project shows the design and construction of a mobile platform for the brake tester plates FUTUR 2000 of the Universidad Politécnica Salesiana, a design process is established which helps to determine the ...
Análisis de la eficiencia del frenado mediante pruebas dinámicas y computacionales para la motocicleta Axxo Tracker 250
(2023-01)
The degree project will focus on the study of braking efficiency, based on dynamic tests with different ranges of brake pads, which in turn will allow the development of an experiment design that provides us with results ...
Simulación del comportamiento de la unión entre elementos metálicos (vigas y columnas) para uniones soldadas y empernadas del proyecto de vivienda Los Capulíes en la ciudad de Cuenca
(2018)
The following comparative study disputes applied forces on structural support beams-columns which were structurally built or desiged to support loads, according to the NEC Standard in the housing program "Los Capulíes", ...