Reducing torque pulsations in PMa-SynRM: A way for improving motor performance

dc.creatorViego, Percy
dc.creatorGómez, Julio R.
dc.creatorSousa Santos, Vladimir
dc.creatorMonteagudo Yanes, José Pedro
dc.creatorQuispe, Enrique C.
dc.date2021-03-04T19:51:46Z
dc.date2021-03-04T19:51:46Z
dc.date2019-08-03
dc.date.accessioned2023-10-03T19:31:18Z
dc.date.available2023-10-03T19:31:18Z
dc.identifier2088-8694
dc.identifierhttps://hdl.handle.net/11323/7958
dc.identifierhttp://doi.org/10.11591/ijpeds.v12.i1.pp%25p
dc.identifierCorporación Universidad de la Costa
dc.identifierREDICUC - Repositorio CUC
dc.identifierhttps://repositorio.cuc.edu.co/
dc.identifier.urihttps://repositorioslatinoamericanos.uchile.cl/handle/2250/9170368
dc.descriptionThis paper aims to evaluate the performance of synchronous reluctance motors assisted by a permanent magnet (PMa-SynRM) focused on efficiency and torque pulsations. PMa-SynRM shows high efficiency and power factor, compared to induction motors (IM), although they have a greater cost. These machines develop relatively high torque ripple, cogging torque, and torque imbalances. Consequently, the electromagnetic torque is reduced, the motor temperature is increased, and mechanical vibrations are induced. The optimal design of the machine structures such as flow barriers, permanent magnets, and stator slots, among others, allow reducing torque pulsations. A comparison is made between different designs of the PMa-SynRM reported in the scientific literature, and the effects on efficiency, torque pulsation, and operating costs are evaluated. A case study on the motor driving the air conditioner blower in a hotel room was made, to determine the best economic variant between IM or PMa-SynRM. A sensitive analysis was made to evaluate several uncertainties. The advantages of using one of the PMa-SynRM analyzed were demonstrated. Also, it was proved that the investment is feasible economically, although NPV and payback are not the best, due to low load factor in inverter-controlled motors in air conditioners.
dc.formatapplication/pdf
dc.formatapplication/pdf
dc.languageeng
dc.publisherCorporación Universidad de la Costa
dc.relation[1] L. Collazo, et al., “A new exact equivalent circuit of the medium voltage three-phase induction motor,” International Journal of Electrical and Computer Engineering (IJECE). vol. 10, no. 6, pp. 6164-6171, 2020.
dc.relation[2] V. Sousa, et al, “Estimating induction motor efficiency under no-controlled conditions in the presences of unbalanced and harmonics voltages,” in 2015 CHILEAN Conference on electrical, electronics engineering, information and communication technologies (CHILECON), 2015, pp. 567 - 572.
dc.relation[3] V. Sousa, et al., “Harmonic distortion evaluation generated by PMW motor drives in electrical industrial systems,” International Journal of Electrical and Computer Engineering (IJECE), vol. 7, no. 6, pp. 3207-3216, 2017.
dc.relation[4] D. R. Quintero, et al., “Methodology to measure electric discharge machining (EDM) bearing currents in induction motors with supply from a variable speed drive (VSD),” INGE CUC, vol. 9, no. 2, pp. 83-93, 2013.
dc.relation[5] V. Sousa, et al., “Assessment of the energy efficiency estimation methods on induction motors considering real-time monitoring,” Measurement, vol. 136, pp. 237–247, 2019.
dc.relation[6] A. T. de Almeida, et al., “Beyond induction motors—technology trends to move up efficiency,” IEEE Transactions on Industry Applications, vol. 50, no. 3, pp. 2103-2114, 2014.
dc.relation[7] E. I. Mbadiwe, et al., “Permanent magnet flux switching motor technology as a solution for high torque clean electric vehicle drive,” International Journal of Power Electronics and Drive System (IJPEDS), vol. 10, no. 2, pp. 575-584, 2019.
dc.relation[8] F. A. Hasan and L. J. Rashad, “Fractional-order PID controller for permanent magnet DC motor based on PSO algorithm,” International Journal of Power Electronics and Drive System (IJPEDS), vol. 10 no. 4, pp. 1724-1733, 2019.
dc.relation[9] D. Mingardi and N. Bianchi, “Line-start pm-assisted synchronous motor design, optimization, and tests,” IEEE Transactions on Industrial Electronics, vol. 64, no. 12, pp. 9739-9747, 2017.
dc.relation[10] R. Vartanian and A.H.A.Toliat, “Design and comparison of an optimized permanent magnet-assisted synchronous reluctance motor (PMa-SynRM) with an induction motor with identical NEMA Frame stators,” in Electric Ship Technologies Symposium (ESTS), Baltimore, USA, 2009, pp. 107-112, 2009.
dc.relation[11] Q. Lin, et al., “Design and optimization of a reluctance-torque-assisted synchronous motor with high efficiency and low torque ripple,” in 2019 22nd International Conference on Electrical Machines and Systems (ICEMS), Harbin, China, pp. 1-4, 2019.
dc.relation[12] Won-ho Kim, et al., “Optimal PM design of PMa-SynRM for wide constant-power operation and torque ripple reduction”, IEEE Transactions on Magnetics, vol. 45, no. 10, pp. 4660-4663, 2009.
dc.relation[13] P.R. Viego, et al., “Direct-on-line-start permanent-magnet-assisted synchronous reluctance motors with ferrite magnets for driving constant loads,” International Journal of Electrical and Computer Engineering (IJECE), vol. 10, no. 1, pp. 651-659, 2020.
dc.relation[14] S. Huang, et al., “Optimization the electromagnetic torque ripple of permanent magnet synchronous motor.” in 2010 International Conference on Electrical and Control Engineering, Wuhan, China, pp. 3969-3972, 2010.
dc.relation[15] J. Li, H., et al., "Vibration analysis of permanent-magnet-assisted synchronous reluctance machines," in 2019 22nd International Conference on Electrical Machines and Systems (ICEMS), Harbin, China pp. 1-6, 2019.
dc.relation[16] M. T. Bin Tarek, J. Herbert and S. Choi, “Analysis of unbalanced magnetic pull of permanent magnet assisted synchronous reluctance motor based on uneven axial temperature distribution of magnets,” in 2017 IEEE International Electric Machines and Drives Conference (IEMDC), Miami, FL, pp. 1-6, 2017.
dc.relation[17] B. Silwal, M. N. Ibrahim and P. Sergean, “Performance of PM-assisted synchronous reluctance machine under rotor eccentricity,” in 2018 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), Amalfi, pp. 319-323, 2018.
dc.relation[18] B. Gaussens, et al., “Torque ripple mitigation of PM-assisted synchronous reluctance machine: design and optimization,” in 2017 20th International Conference on Electrical Machines and Systems (ICEMS), Sidney, NSW, pp. 1-6, 2017.
dc.relation[19] P. Niazi and H.A. Toliyat, “Design of a low-cost concentric winding permanent magnet assisted synchronous reluctance motor drive,” in Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, Kowloon, Hong Kong, vol. 3, pp. 1744-1748, 2005.
dc.relation[20] Wu Ren, et al., “Reducing cogging torque and suppressing torque ripple in PMASynRM for EV/HEV applications,” in 2014 IEEE Conference and Expo Transportation Electrification Asia-Pacific (ITEC Asia-Pacific), Beijing, pp. 1-6, 2014.
dc.relation[21] A. Tap, et al., “Effects of the rotor design parameters on the torque production of a PMaSynRM for washing machine applications”, in 2017 International Conference on Optimization of Electrical and Electronic Equipment (OPTIM) & 2017 Intl Aegean Conference on Electrical Machines and Power Electronics (ACEMP), Brasov, pp. 370-375, 2017.
dc.relation[22] A. O. Dulanto, “Design of a synchronous reluctance motor assisted with permanent magnets for pump applications,” M.S. Thesis, Dept. of Elec. Eng., KTH Royal Ins. of Technology, Sweden, 2016.
dc.relation[23] H.C. Liu, et al., "Design of permanent magnet-assisted synchronous reluctance motor for maximized back-emf and torque ripple reduction," IEEE Transactions on Magnetics, vol. 53, no. 6, pp.1-4, 2017.
dc.relation[24] B. Kerdsup, et al., “Design of permanent magnet-assisted synchronous reluctance motors with maximum efficiency-power factor and torque per cost” in 2018 XIII International Conference on Electrical Machines (ICEM), Alexandroupoli, pp. 2465-2471, 2018.
dc.relation[25] A. Tap, et al., “Effects of the stator design parameters on the torque performance of a PMaSynRM,” in 2017 11th IEEE International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG), Cadiz, pp. 346-351, 2017.
dc.relation[26] C.M. Spargo, et al, “Application of fractional slot concentrated windings to syncronous reluctance motor”, IEEE Transactions on Industry Applications, vol.51, pp. 1446-1455, 2015.
dc.relation[27] O. Payza, et al., “Investigation of losses for a concentrated winding high-speed permanent magnet-assisted synchronous reluctance motor for washing machine application,” IEEE Transactions on Magnetics, vol. 54, no. 11, pp. 1-5, 2018.
dc.relation[28] M. Gamba, et al., "A new PM-assisted synchronous reluctance machine with a nonconventional fractional slot per pole combination," in Optimization of Electrical and Electronic Equipment (OPTIM), 2014 International Conference, Bran, Romania, pp. 268-275, 2014.
dc.relation[29] X. Cheng, et al., “Permanent magnet assisted synchronous reluctance machine with fractional-slot winding configurations,” in 2013 International Electric Machines and Drives Conference, Chicago, IL, pp. 374-381, 2013.
dc.relation[30] W. Ren, et al., “Reducing cogging torque and suppressing torque ripple in PMASynRM for EV/HEV applications”, in Proceedings of the Conference and Expo Transportation Electrification Asia-Pacific (ITEC Asia-Pacific), Beijing, pp. 1-6, 2014.
dc.relation[31] M. J. S. Zuberi, et al., “Techno-economic analysis of energy efficiency improvement in electric motor driven systems in Swiss industry”, Applied Energy, vol. 205, pp. 85–104, 2017.
dc.relation[32] Y. Özkara and M. Atak, “Regional total-factor energy efficiency and electricity saving potential of manufacturing industry in Turkey”, Energy, vol. 93, pp. 495–510, 2015.
dc.relation[33] C.J. Verucchi, et al, “High efficiency electric motors: economic and energy advantages”, IEEE Latin America Transactions, vol. 11, no. 6, pp. 1325-1331, 2013.
dc.relation[34] Resolution No. 28-2011: “Electric rates for the non-residential sector”, Ministry of Finance and Prices, Havana, 2011.
dc.relation[35] E. Sierra, et al., “obtaining load Curves of Distribution transformers by Customers’ Billings: Case Study,” INGE CUC, vol. 10, no. 2, pp. 27-35, 2014.
dc.relation[36] F. J. T. E. Ferreira, et al., "Overview of retrofitting options in induction motors to improve their efficiency and reliability," in 2018 IEEE International Conference on Environment and Electrical Engineering and 2018 IEEE Industrial and Commercial Power Systems Europe (EEEIC/I&CPS Europe), Palermo, pp. 1-12, 2018.
dc.relation[37] A.T. De Almeida, et al, “Technical and economic considerations on super high-efficiency three-phase motors”, IEEE Transactions on Industry Applications, vol. 50, no. 2, pp. 1274-1285, 2014.
dc.relation[38] J. Fong, et al., “IEC61800-9 system standards as a tool to boost the efficiency of electric motor driven systems worldwide”, Inventions 2020, 5, 20, pp 1-15
dc.rightsCC0 1.0 Universal
dc.rightshttp://creativecommons.org/publicdomain/zero/1.0/
dc.rightsinfo:eu-repo/semantics/openAccess
dc.rightshttp://purl.org/coar/access_right/c_abf2
dc.sourceInternational Journal of Power Electronics and Drive Systems
dc.sourcehttp://ijpeds.iaescore.com/index.php/IJPEDS/article/view/21057
dc.subjectPermanent magnet motor drives
dc.subjectSynchronous reluctance motor drives
dc.subjectTorque ripple
dc.subjectCogging torque
dc.subjectEconomic analysis
dc.titleReducing torque pulsations in PMa-SynRM: A way for improving motor performance
dc.typeArtículo de revista
dc.typehttp://purl.org/coar/resource_type/c_6501
dc.typeText
dc.typeinfo:eu-repo/semantics/article
dc.typeinfo:eu-repo/semantics/publishedVersion
dc.typehttp://purl.org/redcol/resource_type/ART
dc.typeinfo:eu-repo/semantics/acceptedVersion
dc.typehttp://purl.org/coar/version/c_ab4af688f83e57aa


Este ítem pertenece a la siguiente institución