An investigation of electrolytic surface damages and electroplated crhomium effects on fatigue behavior of high strength steel
SAE Technical Papers.
De Amorim, Carlos Eduardo Silva
Voorwald, Herman Jacobus Cornelis
Dos Santos Vieira, Luiz Fábio
Pigatin, Walter Luis
Fatigue crack initiation occurs at the surface, although sub surface nucleation has also been reported. Localized imperfections like inclusions close to surface and surface small pits can result in crack sources. Coatings are not always beneficial by fatigue point of view too. Mechanical properties of the covering material can change considerably the fatigue behavior of base metal due to residual surface stresses, to micro cracks or to hydrogen embrittlement. This paper is concerned with analysis of electrolytic etch on the fatigue resistance of a 35NCD16 high strength steel in a mechanical condition of (1760 - 1960) MPa, and analysis of electroplated hard chromium effects on the fatigue resistance in a strength condition of 989 MPa. Hardness impression was used as a reference parameter in case of electrolytic etch. In both cases, experimental data showed that fatigue strength of 35NCD16 steel was considerably reduced. Copyright © 2001 Society of Automotive Engineers, Inc.
Showing items related by title, author, creator and subject.
An investigation of electrolytic surface damages and electroplated crhomium effects on fatigue behavior of high strength steel Universidade Estadual Paulista (UNESP); Behr Brasil Itada; EMBRAER-LIEBHERR/EDE (2001-12-01)Fatigue crack initiation occurs at the surface, although sub surface nucleation has also been reported. Localized imperfections like inclusions close to surface and surface small pits can result in crack sources. Coatings ...
Fatigue behavior and surface characterization of a Y-TZP after laboratory grinding and regeneration firing Universidade Estadual Paulista (UNESP); UNILA - Federal University of Latin American Integration (2018-12-01)This study evaluated the effect of grinding and regeneration firing on the flexural fatigue limit and surface characterization of Lava™ Y-TZP ceramic. Forty bar-shaped specimens with 20 × 4.0 × 1.2 mm constituted the ...
Quantification of the fracture surface profiles resulting from different loading conditions on ductile irons Fernandino, Diego Omar; Boeri, Roberto Enrique (Elsevier, 2015-01)This study focuses on the characterization of the roughness of the fracture surfaces of spheroidal graphite irons of different matrix microstructures, generated under impact, bending and fatigue loading conditions. The ...