dc.creatorMorel, Eneas
dc.creatorRusso, Nélida A.
dc.creatorTorga, Jorge
dc.creatorDuchowicz, Ricardo
dc.date2020-09-16T23:42:18Z
dc.date2020-09-16T23:42:18Z
dc.date2015-12-11
dc.date.accessioned2023-08-31T14:12:08Z
dc.date.available2023-08-31T14:12:08Z
dc.identifierInterferometric system based on swept source-optical coherence tomography scheme applied to the measurement of distances of industrial interest.
dc.identifierhttp://hdl.handle.net/20.500.12272/4528
dc.identifier10.1117/1.OE.56.8.084102
dc.identifier.urihttps://repositorioslatinoamericanos.uchile.cl/handle/2250/8546697
dc.descriptionWe used an interferometric technique based on typical optical coherence tomography (OCT) schemes for measuring distances of industrial interest. The system employed as a light source a tunable erbium-doped fiber laser of ∼20-pm bandwidth with a tuning range between 1520 and 1570 nm. It has a sufficiently long coherence length to enable long depth range imaging. A set of fiber Bragg gratings was used as a self-calibration method, which has the advantage of being a passive system that requires no additional electronic devices. The proposed configuration and the coherence length of the laser enlarge the range of máximum distances that can be measured with the common OCT configuration, maintaining a good axial resolution. A measuring range slightly >17 cm was d0.etermined. The system performance was evaluated by studying the repeatability and axial resolution of the results when the same optical path difference was measured. Additionally, the thickness of a semitransparent medium was also measured.
dc.descriptionFil: Morel, Eneas. Universidad Tecnológica Nacional. Facultad Regional Delta. Grupo de Nanofotonica ; Argentina.
dc.descriptionFil: Torga, Jorge. Universidad Tecnológica Nacional. Facultad Regional Delta. Grupo de Nanofotonica ; Argentina.
dc.descriptionPeer Reviewed
dc.formatapplication/pdf
dc.languageeng
dc.relationhttps://www.spiedigitallibrary.org/journals/Optical-Engineering/volume-55/issue-info:eu-repo/semantics/restrictedAccess
dc.rightsinfo:eu-repo/semantics/openAccess
dc.rightshttp://creativecommons.org/licenses/by-nc-sa/4.0/
dc.rightsAtribución-NoComercial-CompartirIgual 4.0 Internacional
dc.rightsMorel, Eneas
dc.rightsAtribución – No Comercial – Compartir Igual (by-nc-sa)
dc.sourceOptical Engineering
dc.subjectUTN
dc.subjectFRD
dc.subjectOptical coherence tomography
dc.subjectmetrological instrumentation
dc.subjectdistance measurement.
dc.titleInterferometric system based on swept source-optical coherence tomography scheme applied to the measurement of distances of industrial interest
dc.typeinfo:eu-repo/semantics/article
dc.typeinfo:eu-repo/semantics/publishedVersion


Este ítem pertenece a la siguiente institución