Relación entre el módulo de elasticidad global y el local en vigas de eucaliptus gransis de Argentina.

dc.creatorPiter, Juan Carlos Jesús
dc.creatorZerbino, Raúl Luis
dc.creatorBlab, Hans Joachim
dc.date2016-12-06T15:02:35Z
dc.date2016-12-06T15:02:35Z
dc.date2003
dc.date.accessioned2023-08-31T13:51:59Z
dc.date.available2023-08-31T13:51:59Z
dc.identifierRevista Maderas : ciencia y Tecnología (2) : 107-116 (2003).
dc.identifier0717-3644
dc.identifierhttp://hdl.handle.net/20.500.12272/1331
dc.identifier.urihttps://repositorioslatinoamericanos.uchile.cl/handle/2250/8544547
dc.descriptionEn esta publicación se presentan los resultados de una investigación orientada a estudiar la relación entre el Módulo de Elasticidad global y el local en madera aserrada de Eucalyptus grandis de Argentina. Con este fin, se llevó a cabo un programa experimental con 50 vigas de tamaño estructural sometidas a flexión. Los resultados obtenidos según las normas europeas muestran los valores para ambos Módulos de Elasticidad y la influencia que sobre ellos ejercen las características que más afectan su resistencia y rigidez, así como también dan evidencia de la efectividad del criterio adoptado por la norma ASTM O 198 (1999) para corregir la influencia del esfuerzo de corte sobre el Módulo de Elasticidad global.
dc.descriptionThe present paper reports the results of an investigation regarding the relationship between the global and the local Modulus of Elasticity in sawn tirnber of Argentinean Eitcalyptus grandis. Por this purpose an empirical research project with 50 beams in structural sizes subjected to bending was carried out. The results obtained according to European standards show the values of both types of Modulus of Elasticiry and the influence of the more important strength and stiffness reducing growth characteristics on their variation, as well as give evidence of rhe effectiveness of the criterion established in the American standard ASTM O 198 (1999) for correcting rhe influence of shear on the global Modulus of Elasticity.
dc.descriptionFil: Piter, Juan Carlos Jesús. Universidad Tecnológica Nacional. Facultad Regional Concepción del Uruguay. Departamento Ingeniería Civil. Grupo de Estudio de Maderas; Argentina.
dc.descriptionFil: Zerbino, Raúl Luis. Universidad Nacional de La Plata. Facultad de Ingeniería; Argentina.
dc.descriptionFil: Blab, Hans Joachim. Universitat Karlsruhe. Lehrstuhl fur Ingenieurholzbau und Baukonstruktionen; Alemania.
dc.descriptionPeer Reviewed
dc.formatapplication/pdf
dc.languagespa
dc.relationAMERICAN SocIETY FOR TESTING ANO MATERIALS. 1999. ASTM O 198, Standard test methods of sraric tests oflumber in structural sizes. ASTM, West Conshohocken, PA.
dc.relationAMERICAN Socnrrv FOR TESTING ANO MATERIALS. 1999. ASTM O 245, Standard pracrice for esrablishing strucrural grades and related allowable properties for visually graded lumber. ASTM, Wesr Conshohocken, PA
dc.rightsinfo:eu-repo/semantics/openAccess
dc.rightshttp://creativecommons.org/licenses/by-nc-nd/3.0/us/
dc.rightsPiter, Juan Carlos Jesús ; Zerbino, Raúl Luis ; Blab, Hans Joachin
dc.rightsNo comercial con fines académicos.
dc.rightsAttribution-NonCommercial-NoDerivs 3.0 United States
dc.subjectEucaliptus grandis
dc.subjectMódulo de elasticidad
dc.subjectRigidez
dc.subjectDeformación por corte
dc.titleRelationship between global and local modulus of elasticity beams of Argentinean eucalyptus grandis
dc.titleRelación entre el módulo de elasticidad global y el local en vigas de eucaliptus gransis de Argentina.
dc.typeinfo:eu-repo/semantics/article
dc.typeinfo:eu-repo/semantics/acceptedVersion
dc.typeinfo:ar-repo/semantics/artículo
dc.coverageArgentina


Este ítem pertenece a la siguiente institución