dc.contributorGonzález, Iliana
dc.creatorIbujés Zambonino, Andrés Santiago
dc.creatorRueda Flores, Walter Paúl
dc.date2017-10-25T17:25:33Z
dc.date2017-10-25T17:25:33Z
dc.date2017
dc.date.accessioned2023-08-08T21:21:28Z
dc.date.available2023-08-08T21:21:28Z
dc.identifierIbujés Zambonino, Andrés Santiago. Rueda Flores, Walter Paúl (2017). Diagnóstico energético del sistema de suministro eléctrico de la Universidad Técnica de Cotopaxi. Ingeniería Eléctrica. UTC. Latacunga. 116 p.
dc.identifierhttp://repositorio.utc.edu.ec/handle/27000/4036
dc.identifier.urihttps://repositorioslatinoamericanos.uchile.cl/handle/2250/8077546
dc.descriptionNowadays, the weak planning on the distribution of charges, plus the rapid growth of electricity demand at Technical University of Cotopaxi ("UTC"), has produced a load imbalance into all the phases of the University’s electric system which is out of the established limits of energy regulations. This project aims to develop an energy diagnosis of the energy supply system at the “A” and “B” buildings of the Technical University of Cotopaxi. To identify problems and propose specific solutions; the first stage of this project, the current situation of the university’s electric system was analyzed. Subsequently, measures in the main electrical boards were taken using the Red Fluke 435 Series II analyzer. Through this measurement process, the current electric parameters were identified, and the norms and regulations’ comparison parameters were gotten from the electric data obtained. Also, based on the electrical plans provided by the University, the charge assessment was run which was used to develop the simulation and modeling....
dc.descriptionEn la actualidad el déficit de planificación en la distribución de cargas, sumado al crecimiento acelerado de la demanda eléctrica de la Universidad Técnica de Cotopaxi (UTC), ha originado un desbalance de carga entre las fases, encontrándose fuera de los límites establecidos por la norma 004-01 CONELEC. El presente proyecto está orientado al diagnóstico energético del sistema eléctrico en el bloque A y B. Para dar solución a este problema, se realizaron mediciones con el analizador de red Fluke 435 serie II en los tableros principales, adquiriendo las variables eléctricas de todo el sistema, y con la ayuda de los planos eléctricos se realizó un levantamiento de toda la carga instalada necesaria para la simulación de los flujos de potencia....
dc.format116 p.
dc.languagespa
dc.publisherLATACUNGA / UTC / 2017
dc.rightsopenAccess
dc.rightshttp://creativecommons.org/licenses/by-nc-sa/3.0/ec/
dc.subjectDESBALANCE DE VOLTAJE
dc.subjectCALIDAD DE ENERGÍA
dc.subjectCAÍDA DE VOLTAJE
dc.titleDiagnóstico energético del sistema de suministro eléctrico de la Universidad Técnica de Cotopaxi
dc.typebachelorThesis


Este ítem pertenece a la siguiente institución