dc.contributorVillacrés, María Dolores (dir)
dc.creatorGuerra González, Andrea Estefanía
dc.date2014-04-09T19:38:11Z
dc.date2014-04-09T19:38:11Z
dc.date2013
dc.date.accessioned2023-08-08T20:03:52Z
dc.date.available2023-08-08T20:03:52Z
dc.identifierTesis (Odontóloga), Universidad San Francisco de Quito, Colegio de Ciencias de la Salud; Quito, Ecuador, 2013
dc.identifierhttp://repositorio.usfq.edu.ec/handle/23000/2645
dc.identifier.urihttps://repositorioslatinoamericanos.uchile.cl/handle/2250/8061812
dc.descriptionIn an attempt to save time during brackets´ bonding, manufacturers created metal and ceramic brackets that have been precoated with the adhesive material. The adhesive used on the precoated brackets (APC) is similar in composition to that used for bonding uncoated brackets. The difference is essentially in the percentages of the various ingredients incorporated in the adhesive material. The purpose of this study is to determine if the APC Plus brackets have better shear bond strength than the Clarity standard brackets. Forty-five recently extracted human first inferior premolars were mounted in acrylic bases and these two types of brackets were bonded according to the manufacturer´s instructions. The shear bond strength was produced by the MTS machine of universal forces. The current findings indicated that: (1) the Clarity APC Plus brackets didn´t have higher shear bond strength than the Clarity standard brackets. (2) The Clarity standard and the Clarity APC Plus brackets didn´t have any statistically significant difference in the shear bond strength. (3) All bracketadhesive samples provided clinically acceptable shear bond forces.
dc.descriptionEn un intento de ahorrar tiempo durante la adhesión de brackets, las casas comerciales han fabricado brackets metálicos y de cerámica con un recubrimiento previo de material adhesivo. El sistema adhesivo utilizado en los brackets con recubrimientos previo (APC) es similar en composición al sistema adhesivo utilizado en los brackets convencionales sin recubrimiento. La diferencia es esencialmente en los porcentajes de los diversos ingredientes incorporados en el material adhesivo. El objetivo de este estudio es determinar si los brackets Clariry APC Plus (3M), tendrán mayor fuerza adhesiva que los brackets Clarity estándar (Transbond XT) frente a una fuerza de cizallamiento. Cuarenta y cinco primeros premolares inferiores humanos, recién extraídos, fueron montados en bases de acrílico y utilizados para adherir los dos tipos de brackets de acuerdo a las instrucciones del fabricante. La fuerza de cizallamiento fue realizada en la máquina de fuerzas universales MTS. Los resultados encontrados fueron: (1) los brackets Clarity APC Plus generaron una mayor fuerza adhesiva que los brackets Clarity estándar frente a la fuerza de cizallamiento. (2) Los brackets Clarity APC Plus y Clarity estándar no tuvieron una diferencia estadísticamente significativa en cuanto a su adhesión frente a una fuerza de cizallamiento. (3)Todas las muestras de brackets-adhesivo, sometidas a una prueba de cizallamiento, generan una fuerza adhesiva clínicamente aceptable.
dc.format128 h.
dc.formatapplication/pdf
dc.languageesp
dc.publisherQuito: USFQ, 2013
dc.rightsopenAccess
dc.rightshttp://creativecommons.org/licenses/by-nc-sa/3.0/ec/
dc.subjectMedicina
dc.subjectODONTOLOGÍA
dc.titleComparación in vitro de la fuerza de adhesión sobre esmalte de brackets Clarity estándar (Transbond XT 3M) con los brackets Clarity APC Plus (3M), mediante una prueba de cizallamiento
dc.typebachelorThesis


Este ítem pertenece a la siguiente institución