dc.contributorVega González,Juan Antonio
dc.creatorSánchez García, Sheyla Yasmín
dc.creatorLeyton Robles,Takumi Anderson
dc.date2022-01-31T15:23:12Z
dc.date2022-01-31T15:23:12Z
dc.date2022-01-31T15:23:12Z
dc.date2022-01-31T15:23:12Z
dc.date2022-01
dc.date.accessioned2023-08-08T10:35:21Z
dc.date.available2023-08-08T10:35:21Z
dc.identifierhttp://dspace.unitru.edu.pe/handle/UNITRU/18644
dc.identifier.urihttps://repositorioslatinoamericanos.uchile.cl/handle/2250/8033743
dc.descriptionSe estudió la influencia del potencial de hidrógeno (pH) y tiempo de flotación sobre el porcentaje de recuperación de Pb-Ag y Zn mediante flotación diferencial a partir de un compósito de mineral que estuvo constituido por cinco muestras tomadas de diferentes zonas de la región de Áncash, cuya composición química analizada fue de 234.06 g/t de Ag, 2.68% Pb, 4.81% Zn y 21.83% Fe. Se aplicó un diseño factorial con dos variables independientes, siendo el potencial de hidrógeno (pH) que se evaluó en los niveles 6.0, 6.5 y 7.0, y la variable tiempo de flotación que se evaluó en los niveles de 1, 2, 4, 7 y 12 minutos; y la variable dependiente fue el porcentaje de recuperación de plomo, plata y zinc. Se aplicó los modelos de cinética de flotación García- Zuñiga, Agar y Klimpel, para la flotación bulk Pb – Ag. De los resultados obtenidos se determinó que al incrementar el potencial de hidrógeno y tiempo de flotación se incrementa la recuperación de plata, plomo y zinc. Se concluye, que al aumentar el pH hasta 7.0, se incrementa la recuperación de plata y plomo obteniéndose 87.96% y 87.17% respectivamente, con leyes de 1961.50 g/t Ag, 21.94 % Pb y 12.10 g/t Au. Con el modelo de Klimpel se determinó el tiempo óptimo para flotar Pb-Ag siendo de 7.88 minutos. En la flotación de zinc se obtuvo una recuperación de 76.10 % y ley de concentrado de 48.92% Zn. Se determinó que el pH, el tiempo de flotación y su interacción tienen una influencia significativa obteniendo un P=0,0, según el análisis de varianza.
dc.descriptionThe influence of hydrogen potential (pH) and flotation time on the recovery percentage of Pb-Ag and Zn was studied by means of differential flotation from a mineral composite that consisted of five samples taken from different areas of the region of Ancash, whose chemical composition analyzed was 234.06 g/t of Ag, 2.68% Pb, 4.81% Zn and 21.83% Fe. A factorial design with two independent variables was applied, being the hydrogen potential (pH) that was evaluated at levels 6.0, 6.5 and 7.0, and the floating time variable that was evaluated at levels 1, 2, 4, 7 and 12 minutes; and the dependent variable was the recovery percentage of lead, silver and zinc. The García-Zuñiga, Agar and Klimpel flotation kinetics models were applied for the bulk Pb - Ag flotation. From the results obtained, it was determined that by increasing the hydrogen potential and the floating time, the recovery of silver, lead and zinc increases. It is concluded that by increasing the pH to 7.0, the recovery of silver and lead increases, obtaining 87.96% and 87.17% respectively, with grades of 1961.50 g/t Ag, 21.94% Pb and 12.10 g/t Au. With the Klimpel model, the optimum time to float Pb-Ag was determined, being 7.88 minutes. In the zinc flotation, a recovery of 76.10% and a concentrate grade of 48.92% Zn were obtained. It was determined that the pH, the floating time and their interaction have a significant influence, obtaining a P = 0.0, according to the analysis of variance.
dc.formatapplication/pdf
dc.languagespa
dc.publisherUniversidad Nacional de Trujillo
dc.publisherPE
dc.rightsinfo:eu-repo/semantics/openAccess
dc.rightshttps://creativecommons.org/licenses/by/2.5/pe/
dc.subjectrecuperación de Pb-Ag y Zn mediante flotación diferencial
dc.subjecthttp://purl.org/pe-repo/ocde/ford#2.00.00
dc.titleInfluencia del potencial de hidrógeno (pH) y tiempo de flotación sobre el porcentaje de recuperación de Pb-Ag y Zn mediante flotación diferencial de un mineral de Áncash
dc.typeinfo:eu-repo/semantics/bachelorThesis


Este ítem pertenece a la siguiente institución