dc.creatorHernández Canales, Juan Carlos
dc.date2013-11-30
dc.date.accessioned2023-08-07T20:51:03Z
dc.date.available2023-08-07T20:51:03Z
dc.identifierhttps://revistas.usac.edu.gt/index.php/asa/article/view/1486
dc.identifier10.36829/08ASA.v8i1.1486
dc.identifier.urihttps://repositorioslatinoamericanos.uchile.cl/handle/2250/7942873
dc.descriptionThe hydraulic design of an experimental model of trickling filter was made using coir pith as filtering medium. The following physico- chemical characteristics of Coir were found: absorption 164,42%, density 0,22 g/cm3, specific surface area 50 m2/m3, moisture 11,87%, total dry matter 88,13%, ether extract 0,33%, crude fiber 45,83%, crude protein 2,15%, ash 5,63%, nitrogen free extract 46,06% and potential hydrogen units of 5,01. For calculated the design parameters were used Eckenfelder and Bruce & Merkens’ equations, the result of this were: flow 1,21 m3/d, retention time 45 s, filtration rate 4,59 m3/m2d, vertical hydraulic load 2,29 m3/m3d, hydraulic surface 0,046 m3/m2d, pollutant load 0,2178 kg BOD5/d, vertical organic load 0,4122 kg DBO5/m3d and organic surface load 0,0082 kg DBO5/m2d. The evaluation of the experimental model regarding nitrogen and total phosphorus was 41 mg/l at the entrance to 27 mg/l at output, with 33% efficiency in total Nitrogen, 11,0 mg/l at the entrance to 13,1 mg/l in the output, with an efficiency of 24% negative total Phosphorus (-24%)en-US
dc.descriptionSe realizó el diseño hidráulico de un modelo experimental de filtro percolador utilizando estopa de coco como medio filtrante. Se obtuvieron las siguientes características fisicoquímicas de la estopa de coco: absorción 164,42%, densidad 0,22 g/cm3, área superficial específica 50 m2/m3, humedad 11,87%, materia seca total 88,13%, extracto etéreo 0,33%, fibra cruda 45,83%, proteína cruda 2,15%, ceniza 5,63%, extracto libre de nitrógeno 46,06% y potencial de hidrógeno 5,01 unidades. Se utilizaron las ecuaciones de Eckenfelder y Bruce & Merkens para el cálculo de los parámetros de diseño los cuales fueron: caudal 1,21 m3/d, tiempo de retención 45 s, velocidad de filtración 4,59 m3/m2d, carga hidráulica vertical 2,29 m3/m3d, carga hidráulica superficial 0,046 m3/m2d, carga contaminante 0,2178 kg DBO5/d, carga orgánica vertical 0,4122 kg DBO5/m2d y carga orgánica superficial 0,0082 kg DBO5/m3d. La evaluación del modelo experimental respecto a Nitrógeno y Fósforo total fue: 41 mg/l en la entrada y 27 mg/l en la salida, con 33% de eficiencia en Nitrógeno total, 11,0 mg/l en la entrada y 13,1 mg/l en la salida, con una eficiencia negativa de 24% en Fósforo total (-24%).es-ES
dc.formatapplication/pdf
dc.languagespa
dc.publisherUniversidad de San Carlos de Guatemalaes-ES
dc.relationhttps://revistas.usac.edu.gt/index.php/asa/article/view/1486/954
dc.rightshttps://creativecommons.org/licenses/by-nc-sa/4.0es-ES
dc.sourceAgua, Saneamiento & Ambiente; Vol. 8 No. 1 (2013); 48-52en-US
dc.sourceAgua, Saneamiento & Ambiente; Vol. 8 Núm. 1 (2013); 48-52es-ES
dc.source2224-9958
dc.source2222-2499
dc.subjectDiseñoes-ES
dc.subjectconstrucciónes-ES
dc.subjectevaluaciónes-ES
dc.subjectnitrógeno totales-ES
dc.subjectfósforo totales-ES
dc.subjectestopa de cocoes-ES
dc.subjectcaracterización fisicoquímicaes-ES
dc.subjecteficienciaes-ES
dc.subjectDesignen-US
dc.subjectconstructionen-US
dc.subjectevaluationen-US
dc.subjecttotal nitrogenen-US
dc.subjecttotal phosphorusen-US
dc.subjectcoir pithen-US
dc.subjectphysicochemical characterizationen-US
dc.subjectefficiencyen-US
dc.titleDISEÑO DE UN MODELO EXPERIMENTAL DE FILTRO PERCOLADOR UTILIZANDO ESTOPA DE COCO COMO MEDIO FILTRANTE, PARA LA REDUCCIÓN DE NITRÓGENO Y FÓSFORO TOTAL DE LAS AGUAS RESIDUALES DOMÉSTICAS PROCEDENTES DE LA PLANTA PILOTO DE TRATAMIENTO AURORA II “ING. ARTURO Pes-ES
dc.typeinfo:eu-repo/semantics/article
dc.typeinfo:eu-repo/semantics/publishedVersion
dc.typePeer-evaluated manuscript.en-US
dc.typeManuscrito evaluado por pares.es-ES


Este ítem pertenece a la siguiente institución