dc.contributor | García Ávila, Fausto Fernando | |
dc.creator | Alvarado Pacheco, María Belén | |
dc.creator | Mayancela Santander, Erika Fernanda | |
dc.date.accessioned | 2022-11-23T16:23:29Z | |
dc.date.accessioned | 2023-05-22T16:31:38Z | |
dc.date.available | 2022-11-23T16:23:29Z | |
dc.date.available | 2023-05-22T16:31:38Z | |
dc.date.created | 2022-11-23T16:23:29Z | |
dc.date.issued | 2022-11-21 | |
dc.identifier | http://dspace.ucuenca.edu.ec/handle/123456789/40332 | |
dc.identifier.uri | https://repositorioslatinoamericanos.uchile.cl/handle/2250/6326176 | |
dc.description.abstract | The present work was carried out in the company GALVÁNICA CIA. LTDA., located in the
city of Cuenca. The objective of the study was to optimize the coagulation-flocculation
process in the treatment of residual water in the capping tank. For which, jar tests were
carried out by applying three different coagulants (aluminum sulfate, ferric chloride and
polyaluminum chloride) in the wastewater, once the pH was adjusted. The concentration of
iron and aluminum in raw water, water with pH adjustment and water treated with the different
coagulants was evaluated. The results obtained after the jar tests indicated that the
coagulant with the highest percentage of removal was aluminum sulfate, showing a removal
of 97.69% and 92.81% of iron and aluminum, respectively. The use of this coagulant is
feasible for the company because its cost makes it economically profitable. For the statistical
analysis, MANOVA was obtained to verify the relationship between the percentages of
removal of metals (iron and aluminum) with respect to the type of coagulant used,
concentration and dose of each coagulant and the pH of the wastewater; Through this
statistical analysis it was also possible to determine that the best coagulant to use is
aluminum sulfate since it gives us better results in iron and aluminum removal. In the
statistical results it was possible to show that there is a direct relationship between the
percentage of metal removal and the type of coagulant, its concentration and the pH of the
water to be used. It will be extended that aluminum sulfate should apply a concentration of
10% for wastewater with a pH of 5.5. In addition, ANOVA was also applied to check if there
is any relationship between the three types of coagulants and the removal of iron and
aluminum. Based on the application of Tukey-HSD, it was possible to determine that there
is no relationship between the coagulants, since each one acts differently in relation to the
established parameters. | |
dc.language | spa | |
dc.publisher | Universidad de Cuenca | |
dc.relation | TIA;223 | |
dc.rights | http://creativecommons.org/licenses/by-nc-nd/4.0/ | |
dc.rights | openAccess | |
dc.rights | Attribution-NonCommercial-NoDerivatives 4.0 Internacional | |
dc.subject | Ingeniería Ambiental | |
dc.subject | Aguas residuales | |
dc.subject | Eliminación de desechos | |
dc.title | Optimización del proceso de coagulación-floculación en el tratamiento de agua residual generada en la cuba de decapado en la empresa Galvánica Cía. LTDA. del cantón Cuenca | |
dc.type | bachelorThesis | |