dc.contributorUniversidade Estadual Paulista (Unesp)
dc.contributorFederal University of Rio Grande do Sul (UFRGS)
dc.contributorPropulsion and Energy Laboratory
dc.date.accessioned2021-06-25T10:47:14Z
dc.date.accessioned2022-12-19T22:23:44Z
dc.date.available2021-06-25T10:47:14Z
dc.date.available2022-12-19T22:23:44Z
dc.date.created2021-06-25T10:47:14Z
dc.date.issued2021-03-01
dc.identifierFuel, v. 287.
dc.identifier0016-2361
dc.identifierhttp://hdl.handle.net/11449/206989
dc.identifier10.1016/j.fuel.2020.119068
dc.identifier2-s2.0-85097767649
dc.identifier.urihttps://repositorioslatinoamericanos.uchile.cl/handle/2250/5387586
dc.description.abstractThis work consists of developing a predictive model (PM) for syngas composition obtained from biomass gasification in fixed bed gasifiers. The PM is composed of three correlations which are made for carbon conversion efficiency, gasification temperature and the correction factor for the equilibrium constant of the water-gas homogeneous reaction. Such correlations were established using results obtained from the application of an optimization method (AOM) that uses Kuhn–Tucker multipliers. Syngas compositions determined through AOM were compared with experimental compositions and those estimated by other models, resulting that the AOM always determines the best estimates with respect to the root mean square error (RMSE). For syngas compositions estimated by AOM, the RMSE interval is [0.21, 4.11]. The PM was validated with six experimental compositions. From the predicted syngas compositions it was found that the ranges for LHV, cold gas efficiency, carbon conversion efficiency and gasification temperature were [4.594, 5.116 MJ/Nm3], [55.74, 68.18%], [74.20, 88.40%] and [749, 918 °C], respectively. Additionally, for the predicted syngas compositions the RMSE interval was determined as [0.68, 2.25]. Therefore, the PM was considered to be effective in estimating syngas compositions.
dc.languageeng
dc.relationFuel
dc.sourceScopus
dc.subjectBiomass
dc.subjectChemical equilibrium model
dc.subjectFixed bed
dc.subjectGasification
dc.subjectSyngas
dc.titleModeling of syngas composition obtained from fixed bed gasifiers using Kuhn–Tucker multipliers
dc.typeArtículos de revistas


Este ítem pertenece a la siguiente institución