Energy planning and management during battery manufacturing

dc.creatorNoriega Angarita, Eliana
dc.creatorCabello Eras, Juan José
dc.creatorHernández Herrera, Hernán
dc.creatorSousa Santos, Vladimir
dc.creatorBalbis Morejón, Milen
dc.creatorSilva Ortega, Jorge Ivan
dc.creatorSagastume Gutiérrez, Alexis
dc.date.accessioned2019-10-28T20:43:45Z
dc.date.accessioned2022-11-14T20:01:20Z
dc.date.available2019-10-28T20:43:45Z
dc.date.available2022-11-14T20:01:20Z
dc.date.created2019-10-28T20:43:45Z
dc.date.issued2019
dc.identifier18069649
dc.identifierhttps://hdl.handle.net/20.500.12442/4273
dc.identifier.urihttps://repositorioslatinoamericanos.uchile.cl/handle/2250/5185810
dc.description.abstractThe aim of this study is to improve energy performance at a battery factory in Colombia by introducing the energy management approach defined in ISO 50001. In the study, the main energy consumptions were identified in the battery formation, the compressed air system and the large electric motors. An energy review was performed in the factory using measurement equipment and statistical techniques. Different actions were proposed to improve energy performance. As a result, a 3.48% reduction in electricity consumption was achieved during the implementation of the proposed measures.
dc.description.abstractEl objetivo de este estudio es mejorar el rendimiento energético en una fábrica de baterías en Colombia mediante la introducción del enfoque de gestión energética definido en ISO 50001. En el estudio, los principales consumos de energía se identificaron en la formación de la batería, el sistema de aire comprimido y la gran red eléctrica motores. Se realizó una revisión energética en la fábrica utilizando equipos de medición y técnicas estadísticas. Se propusieron diferentes acciones para mejorar el rendimiento energético. Como resultado, se logró una reducción del 3,48% en el consumo de electricidad durante la implementación de las medidas propuestas.
dc.languageeng
dc.publisherUniversidade Federal de São Carlos
dc.rightshttp://creativecommons.org/licenses/by-nc-nd/4.0/
dc.rightsinfo:eu-repo/semantics/openAccess
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 Internacional
dc.sourceRevista: Gestão & Produção
dc.sourceVol. 26, N° 4 (2019)
dc.sourcehttp://dx.doi.org/10.1590/0104-530x3928-19
dc.sourceAbdelaziz, E. A., Saidur, R., & Mekhilef, S. (2011). A review on energy saving strategies in industrial sector. Renewable & Sustainable Energy Reviews, 15(1), 150-168. http://dx.doi.org/10.1016/j.rser.2010.09.003.
dc.sourceAmerican National Standard Motors and Generator – ANSI. American National Standards Institute – NEMA. (2012). NEMA MG 1-2012. Virginia.
dc.sourceAragon, C. S., Pamplona, E., & Vidal Medina, J. R. (2013). Identification of energy efficiency investments and their risk assessment. Gestão & Produção, 20(3), 525-536.
dc.sourceBecken, S., Frampton, C., & Simmons, D. (2001). Energy consumption patterns in the accommodation sector: the New Zealand case. Ecological Economics, 39(3), 371- 386. http://dx.doi.org/10.1016/S0921-8009(01)00229-4.
dc.sourceBohdanowicz, P., & Martinac, I. (2007). Determinants and benchmarking of resource consumption in hotels: case study of Hilton International and Scandic in Europe. Energy and Building, 39(1), 82-95. http://dx.doi. org/10.1016/j.enbuild.2006.05.005.
dc.sourceBunse, K., Vodicka, M., Schönsleben, P., Brülhart, M., & Ernst, F. O. (2011). Integrating energy efficiency performance in production management: gap analysis between industrial needs and scientific literature. Journal of Cleaner Production, 19(6-7), 667-679. http://dx.doi. org/10.1016/j.jclepro.2010.11.011.
dc.sourceCabello Eras, J. J., Sagastume Gutiérrez, A., García Lorenzo, D., Cogollos Martínez, J. B., Hens, L., & Vandecasteele, C. (2015). Bridging universities and industry through cleaner production activities: experiences from the Cleaner Production Center at the University of Cienfuegos, Cuba. Journal of Cleaner Production, 108, 873-882. http:// dx.doi.org/10.1016/j.jclepro.2014.11.063.
dc.sourceCabello Eras, J. J., Sousa Santos, V., Sagastume Gutiérrez, A., Guerra Plasencia, M. Á., Haeseldonckx, D., & Vandecasteele, C. (2016). Tools to improve forecasting and control of the electricity consumption in hotels. Journal of Cleaner Production, 137, 803-812. http:// dx.doi.org/10.1016/j.jclepro.2016.07.192.
dc.sourceCagno, E., & Trianni, A. (2014). Evaluating the barriers to specific industrial energy efficiency measures: an exploratory study in small and medium-sized enterprises. Journal of Cleaner Production, 82, 70-83. http://dx.doi. org/10.1016/j.jclepro.2014.06.057.
dc.sourceCamioto, F. C., Rebelatto, D. A. N., & Rocha, R. T. (2015). Análise da eficiência energética nos países do BRICS: um estudo envolvendo a Análise por Envoltória de Dados. Gestão & Produção, 23(1), 192-203. http:// dx.doi.org/10.1590/0104-530X1567-13.
dc.sourceChan, Y., & Kantamaneni, R. (2015). Study on energy efficiency and energy saving potential in industry and on possible policy mechanisms. London: ICF Consulting. Retrieved in 2016, August 15, from https://ec.europa. eu/energy/sites/ener/files/documents/151201 DG ENER Industrial EE study - final report_clean_stc.pdf
dc.sourceChirindo, M., Khan, M. A., & Barendse, P. S. (2016). Considerations for nonintrusive efficiency estimation of inverter-fed induction motors. IEEE Transactions on Industrial Electronics, 63(2), 741-749. http://dx.doi. org/10.1109/TIE.2015.2477801.
dc.sourceChristoffersen, L. B., Larsen, A., & Togeby, M. (2006). Empirical analysis of energy management in Danish industry. Journal of Cleaner Production, 14(5), 516- 526. http://dx.doi.org/10.1016/j.jclepro.2005.03.017.
dc.sourceDeng, S. (2003). Energy and water uses and their performance explanatory indicators in hotels in Hong Kong. Energy and Building, 35(8), 775-784. http://dx.doi.org/10.1016/ S0378-7788(02)00238-4.
dc.sourceDindorf, R. (2012). Estimating potential energy savings in compressed air systems. Procedia Engineering, 39, 204-211. http://dx.doi.org/10.1016/j.proeng.2012.07.026.
dc.sourceDudic, R., Ignjatovic, I., Šešlija, D., Blagojević, V., & Stojiljković, M. (2012). Leakage quantification of compressed air using ultrasound and infrared thermography. Measurement, 45(7), 1689-1694. http:// dx.doi.org/10.1016/j.measurement.2012.04.019.
dc.sourceEuropean Commission – EC. (2014). Communication from the commission to the European parliament and the council energy efficiency and its contribution to energy security and the 2030 Framework for climate and energy policy. Brussels. Retrieved in 2016, August 15, from https://ec.europa.eu/energy/sites/ener/files/ documents/2014_energy_efficiency_communication.pdf
dc.sourceFawkes, S., Oung, K., & Thorpe, D. (2016). Best practices and case studies for industrial energy efficiency improvement: an introduction for policy makers. Copenhagen: DTU. Retrieved in 2016, August 15, from http://www.unepdtu. org/-/media/Sites/energyefficiencycentre/Publications/ C2E2 Publications/Best-Practises-for-Industrial-EE_web. ashx?la=da
dc.sourceGiacone, E., & Mancò, S. (2012). Energy efficiency measurement in industrial processes. Energy, 38(1), 331-345. http://dx.doi.org/10.1016/j.energy.2011.11.054.
dc.sourceGielen, D., & Taylor, P. (2009). Indicators for industrial energy efficiency in India. Energy, 34(8), 962-969. http://dx.doi.org/10.1016/j.energy.2008.11.008.
dc.sourceHasanuzzaman, M., Rahim, N. A., Saidur, R., & Kazi, S. N. (2011). Energy savings and emissions reductions for rewinding and replacement of industrial motor. Energy, 36(1), 233-240. http://dx.doi.org/10.1016/j. energy.2010.10.046.
dc.sourceHens, L., Cabello-Eras, J. J., Sagastume-Gutiérez, A., Garcia- Lorenzo, D., Cogollos-Martinez, J. B., & Vandecasteele, C. (2017). University-industry interaction on cleaner production: the case of the Cleaner Production Center at the University of Cienfuegos in Cuba, a country in transition. Journal of Cleaner Production, 142, 63-68. http://dx.doi.org/10.1016/j.jclepro.2015.10.105.
dc.sourceInternational Electrotechnical Commission – IEC. (2000). IEC 60095-1: lead-acid starter batteries: part 1: general requirements and methods of test. London.
dc.sourceInternational Organization for Standardization – ISO. (2011). ISO 50001: energy management systems: requirements with guidance for use. Geneva.
dc.sourceInternational Organization for Standardization – ISO. (2014). ISO 50004: energy management systems: Guidance for the implementation, maintenance and improvement of an energy management system. Geneva.
dc.sourceJung, J., Zhang, L., & Zhang, J. (2016). Lead-acid battery technologies. fundamentals, materials and applications. Florida: CRC Press.
dc.sourceKaygusuz, K. (2012). Energy for sustainable development: a case of developing countries. Renewable & Sustainable Energy Reviews, 16(2), 1116-1126. http://dx.doi. org/10.1016/j.rser.2011.11.013.
dc.sourceKiessling, R. (1992). Lead acid battery formation techniques. Shelton: Digatron Firing Circuits. Retrieved in 2016, August 15, from http://www.digatron.com/fileadmin/ pdf/lead_acid.pdf
dc.sourceMatson, N. E., & Piette, M. A. (2005). High performance commercial building systems: review of California and National Benchmarking Methods. Working Draft. Berkeley: United States Government. Retrieved in 2016, August 15, from https://www.semanticscholar.org/paper/ Review-of-California-and-National-Benchmarking- Piette-Lawrence/8c0a3ecbe7c21ddcb43625a2104e4 45136c2f009
dc.sourceMiloloza, I. (2013). Tendencies of development of global battery market with emphasis on Republic of Croatia. Interdisciplinary Description of Complex Systems, 11(3), 318-333. http://dx.doi.org/10.7906/indecs.11.3.3.
dc.sourcePalamutcu, S. (2010). Electric energy consumption in the cotton textile processing stages. Energy, 35(7), 2945- 2952. http://dx.doi.org/10.1016/j.energy.2010.03.029.
dc.sourcePavlov, D. (2011). Lead-acid batteries: science and technology: a handbook of lead-acid battery technology and its Influence on the product. Amsterdam: Elsevier.
dc.sourcePosch, A., Brudermann, T., Braschel, N., & Gabriel, M. (2015). Strategic energy management in energy-intensive enterprises: a quantitative analysis of relevant factors in the Austrian paper and pulp industry. Journal of Cleaner Production, 90, 291-299. http://dx.doi.org/10.1016/j. jclepro.2014.11.044.
dc.sourceProut, L. (1993). Aspects of lead/acid battery technology 4: plate formation. Journal of Power Sources, 41(1-2), 195- 219. http://dx.doi.org/10.1016/0378-7753(93)80038-Q.
dc.sourceRantik, M. (1999). Life cycle assessment of five batteries for electric vehicles under different charging regimes (KFB-Meddelande, 28). Goteborg: KFB.
dc.sourceReport Buyer Ltd. (2015). Global and China lead-acid battery industry report, 2015-2018. London. Retrieved in 2016, August 15, from http://www.prnewswire.com/ news-releases/global-and-china-lead-acid-batteryindustry- report-2015-2018-300200529.html
dc.sourceRudberg, M., Waldemarsson, M., & Lidestam, H. (2013). Strategic perspectives on energy management: a case study in the process industry. Applied Energy, 104, 487- 496. http://dx.doi.org/10.1016/j.apenergy.2012.11.027.
dc.sourceRydh, C. J. (1999). Environmental assessment of vanadium redox and lead-acid batteries for stationary energy storage. Journal of Power Sources, 80(1-2), 21-29. http://dx.doi.org/10.1016/S0378-7753(98)00249-3.
dc.sourceRydh, C. J., & Sandén, B. A. (2005). Energy analysis of batteries in photovoltaic systems. Part I: performance and energy requirements. Energy Conversion and Management, 46(11-12), 1957-1979. http://dx.doi. org/10.1016/j.enconman.2004.10.003.
dc.sourceSaidur, R., Rahim, N. A., & Hasanuzzaman, M. (2010). A review on compressed-air energy use and energy savings. Renewable & Sustainable Energy Reviews, 14(4), 1135- 1153. http://dx.doi.org/10.1016/j.rser.2009.11.013.
dc.sourceSiraki, A. G., & Pillay, P. (2012). An in situ efficiency estimation technique for induction machines working with unbalanced supplies. IEEE Transactions on Energy Conversion, 27(1), 85-95. http://dx.doi.org/10.1109/ TEC.2011.2168563.
dc.sourceSousa, V., Hernández Herrera, H., Quispe, E. C., Viego, P. R., & Gómez, J. R. (2017). Harmonic distortion evaluation generated by PWM motor drives in electrical industrial systems. Iranian Journal of Electrical and Computer Engineering, 7(6), 3207-3216. http://dx.doi. org/10.11591/ijece.v7i6.pp3207-3216.
dc.sourceSullivan, J. L., & Gaines, L. (2012). Status of life cycle inventories for batteries. Energy Conversion and Management, 58, 134-148. http://dx.doi.org/10.1016/j. enconman.2012.01.001.
dc.sourceVine, E. (2005). An international survey of the energy service company ESCO industry. Energy Policy, 33(5), 691-704. http://dx.doi.org/10.1016/j.enpol.2003.09.014.
dc.sourceWeinert, N., Chiotellis, S., & Seliger, G. (2011). Methodology for planning and operating energy-efficient production systems. CIRP Annals Manufacturing Technology, 60(1), 41-44. http://dx.doi.org/10.1016/j.cirp.2011.03.015.
dc.sourceCañizares, G., Cuevas, M., Pérez, R. A., & González, E. (2015). Diseño e integración del sistema de gestión de la energía al sistema de gestión de la calidad en la ronera central” Agustín Rodríguez Mena. Sobre los Derivados de la Caña de Azúcar, 49(1), 46-52.
dc.sourceCastrillón, R., González, A., & Quispe, E. (2013). Mejoramiento de la eficiencia energética en la industria del cemento por proceso húmedo a través de la implementación del sistema de gestión integral de la energía. Dyna, 80(177), 115-123.
dc.sourceOspino-Castro, A. (2010). Análisis del potencial energético solar en la Región Caribe para el diseño de un sistema fotovoltaico. INGECUC, 6(6), 1-8. Retrieved in 2016, August 15, from http://revistascientificas.cuc.edu.co/ index.php/ingecuc/article/view/296
dc.sourceSoto, J., Borroto, A., Bah, M. A., González, R., Curbelo, M., & Díaz, A. M. (2014). Diseño y aplicación de un procedimiento para la planificación energética según la NC-ISO 50001: 2011. Ingeniería Energética, 35(1), 38-47.
dc.sourceYanes, J. P. M., & Gaitan, O. G. (2005). Herramientas para la gestión energética empresarial. Sciences et Techniques, 3(29), 169-174.
dc.sourceCastro, F., Aparecida, D., & Teixeira, R. (2015). Análise da eficiência energética nos países do BRICS: um estudo envolvendo a Análise por Envoltória de Dados. Gestão & Produção, 23(1), 192-203.
dc.subjectEnergy planning
dc.subjectEnergy efficiency
dc.subjectISO 50001
dc.subjectPlanificación energética
dc.subjectEficiencia energética
dc.titleEnergy planning and management during battery manufacturing
dc.typearticle


Este ítem pertenece a la siguiente institución