dc.contributorSánchez Terrones, Víctor Hugo
dc.creatorChavarri Vargas, Luis Alex
dc.creatorGuevara Muñoz, Wilder Jesus
dc.date.accessioned2018-05-29T01:08:21Z
dc.date.accessioned2022-10-24T16:33:16Z
dc.date.available2018-05-29T01:08:21Z
dc.date.available2022-10-24T16:33:16Z
dc.date.created2018-05-29T01:08:21Z
dc.date.issued2018-05-22
dc.identifierChavarri, L. A., & Guevara, W. J. (2018). Influencia del reemplazo proporcional del agregado fino por la utilización de plástico (PET) y fibra de polipropileno (sikacem®-1 fiber) en la resistencia a compresión del concreto f’c=210 kg/cm2, Caserío La Banda, Cajamarca, 2017 (Trabajo de suficiencia). Repositorio de la Universidad Privada del Norte. Recuperado de http://hdl.handle.net/11537/13384
dc.identifierTES 624 CHAV/I 2018
dc.identifierhttps://hdl.handle.net/11537/13384
dc.identifier.urihttps://repositorioslatinoamericanos.uchile.cl/handle/2250/4731516
dc.description.abstractRESUMEN La presente investigación tiene como objetivo determinar la influencia del reemplazo del agregado fino por Plástico (PET) y fibras de polipropileno (Sikacem® - 1 Fiber) en la resistencia a compresión del concreto f’c= 210 kg/cm 2 , para lo cual se determinó las características físicas de los materiales y luego se elaboró los diseños de mezcla según el método del “módulo de finura de la combinación de agregados”, tanto para el concreto patrón como para los concretos con reemplazo de 2%, 4% y 10% de pl ásti co y fi bras de pol i propi l eno, según su especificación técnica, en cada uno de los tipos de concreto se realizaron ensayos de asentamiento, peso unitario y temperatura en el concreto fresco; de igual manera se ensayó en su estado endurecido a una edad equivalente de 7, 14 y 28 días, determinando la resistencia a compresión de los diferentes tipos de concreto, el cual causa efecto al incrementar el reemplazo del agregado fino por pl ásti co y fi bras de pol i propi l eno respecto al concreto patrón. PALABRA CLAVES: Plástico, fibras de propileo, resistencia a compresión, reemplazo.
dc.description.abstractABSTRACT The objective of the present investigation is to determine the influence of the replacement of the fine aggregate by plastic (PET) and polypropylene fibers (Sikacem® - 1 Fiber) on the concrete compressive strength f'c = 210 kg / cm2, for which determined the physical characteristics of the materials and then elaborated the mixing designs according to the method of "fineness module of the combination of aggregates", both for the concrete pattern and for concrete with replacement of 2%,4%,10% of plastic and polypropylene fibers, according to their technical specification, in each of the types of concrete were performed settlement tests, unit weight and temperature in fresh concrete; similarly, it was tested in its hardened state at an equivalent age of 7, 14 and 28 days, determining the compressive strength of the different types of concrete, which causes effect by increasing the replacement of the fine aggregate by plastic and polypropylene fibers to the concrete pattern. KEYWORDS: Plastic, propylene fibers, compression resistance, replacement.
dc.languagespa
dc.publisherUniversidad Privada del Norte
dc.publisherPE
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.sourceUniversidad Privada del Norte
dc.sourceRepositorio Institucional - UPN
dc.subjectConcreto
dc.subjectCemento
dc.subjectAgua
dc.subjectIndustria del plástico
dc.titleInfluencia del reemplazo proporcional del agregado fino por la utilización de plástico (PET) y fibra de polipropileno (sikacem®-1 fiber) en la resistencia a compresión del concreto f’c=210 kg/cm2, Caserío La Banda, Cajamarca, 2017
dc.typeinfo:eu-repo/semantics/bachelorThesis


Este ítem pertenece a la siguiente institución