dc.creatorTorres, Ednildo Andrade
dc.creatorCerqueira, Gilberto S.
dc.creatorFerrer, Tiago. M.
dc.creatorQuintella, Cristina Maria Assis Lopes Tavares da Mata Hermida
dc.creatorRaboni, Massimo
dc.creatorTorretta, Vincenzo
dc.creatorUrbini, Giordano
dc.creatorTorres, Ednildo Andrade
dc.creatorCerqueira, Gilberto S.
dc.creatorFerrer, Tiago. M.
dc.creatorQuintella, Cristina Maria Assis Lopes Tavares da Mata Hermida
dc.creatorRaboni, Massimo
dc.creatorTorretta, Vincenzo
dc.creatorUrbini, Giordano
dc.date.accessioned2022-10-07T19:18:05Z
dc.date.available2022-10-07T19:18:05Z
dc.date.issued2013
dc.identifier0956-053X
dc.identifierhttp://repositorio.ufba.br/ri/handle/ri/14778
dc.identifierv. 33, n. 12
dc.identifier.urihttp://repositorioslatinoamericanos.uchile.cl/handle/2250/4013354
dc.description.abstractIn Brazil, and mainly in the State of Bahia, crude vegetable oils are widely used in the preparation of food. Street stalls, restaurants and canteens make a great use of palm oil and soybean oil. There is also some use of castor oil, which is widely cultivated in the Sertão Region (within the State of Bahia), and widely applied in industry. This massive use in food preparation leads to a huge amount of waste oil of different types, which needs either to be properly disposed of, or recovered. At the Laboratorio Energia e Gas-LEN (Energy & Gas lab.) of the Universidade Federal da Bahia, a cycle of experiments were carried out to evaluate the recovery of waste oils for biodiesel production. The experiences were carried out on a laboratory scale and, in a semi-industrial pilot plant using waste oils of different qualities. In the transesterification process, applied waste vegetable oils were reacted with methanol with the support of a basic catalyst, such as NaOH or KOH. The conversion rate settled at between 81% and 85% (in weight). The most suitable molar ratio of waste oils to alcohol was 1:6, and the amount of catalyst required was 0.5% (of the weight of the incoming oil), in the case of NaOH, and 1%, in case of KOH. The quality of the biodiesel produced was tested to determine the final product quality. The parameters analyzed were the acid value, kinematic viscosity, monoglycerides, diglycerides, triglycerides, free glycerine, total glycerine, clearness; the conversion yield of the process was also evaluated.
dc.languageen
dc.rightsAcesso Aberto
dc.sourcehttp://dx.doi.org/10.1016/j.wasman.2013.07.030
dc.subjectBiodiesel
dc.subjectEnergy production
dc.subjectPilot plant
dc.subjectWaste oils
dc.titleRecovery of different waste vegetable oils for biodiesel production: a pilot experience in Bahia State, Brazil
dc.typeArtigo de Periódico


Este ítem pertenece a la siguiente institución