dc.contributorMartinelli, Antônio Eduardo
dc.contributor
dc.contributorhttp://lattes.cnpq.br/2357217530716519
dc.contributor
dc.contributorhttp://lattes.cnpq.br/0022988322449627
dc.contributorMelo, Dulce Maria de Araújo
dc.contributor
dc.contributorhttp://lattes.cnpq.br/3318871716111536
dc.contributorCurbelo, Fabíola Dias da Silva
dc.contributor
dc.contributorhttp://lattes.cnpq.br/6991333478380004
dc.contributorGarnica, Alfredo Ismael Curbelo
dc.contributor
dc.contributorhttp://lattes.cnpq.br/0257037690238235
dc.creatorFreitas, Júlio Cezar de Oliveira
dc.date.accessioned2010-10-27
dc.date.accessioned2014-12-17T14:08:39Z
dc.date.accessioned2022-10-06T13:16:08Z
dc.date.available2010-10-27
dc.date.available2014-12-17T14:08:39Z
dc.date.available2022-10-06T13:16:08Z
dc.date.created2010-10-27
dc.date.created2014-12-17T14:08:39Z
dc.date.issued2010-06-18
dc.identifierFREITAS, Júlio Cezar de Oliveira. Desenvolvimento de sistemas de aditivos químicos para aplicação em cimentações de poços de petróleo. 2010. 85 f. Dissertação (Mestrado em Pesquisa e Desenvolvimento em Ciência e Engenharia de Petróleo) - Universidade Federal do Rio Grande do Norte, Natal, 2010.
dc.identifierhttps://repositorio.ufrn.br/jspui/handle/123456789/12920
dc.identifier.urihttp://repositorioslatinoamericanos.uchile.cl/handle/2250/3966273
dc.description.abstractThe primary cementing is an important step in the oilwell drilling process, ensuring the mechanical stability of the well and the hydraulic isolation between casing and formation. For slurries to meet the requirements for application in a certain well, some care in the project should be taken into account to obtain a cement paste with the proper composition. In most cases, it is necessary to add chemicals to the cement to modify its properties, according to the operation conditions and thus obtain slurries that can move inside the jacket providing a good displacement to the interest area. New technologies of preparation and use of chemicals and modernization of technological standards in the construction industry have resulted in the development of new chemical additives for optimizing the properties of building materials. Products such as polycarboxylate superplasticizers provide improved fluidity and cohesion of the cement grains, in addition to improving the dispersion with respect to slurries without additives. This study aimed at adapting chemical additives used in civil construction to be used use in oilwell cement slurries systems, using Portland cement CPP-Special Class as the hydraulic binder. The chemical additives classified as defoamer, dispersant, fluid loss controller and retarder were characterized by infrared absorption spectroscopy, thermogravimetric analyses and technological tests set by the API (American Petroleum Institute). These additives showed satisfactory results for its application in cement slurries systems for oil wells. The silicone-based defoamer promoted the reduction of air bubbles incorporated during the stirring of the slurries. The dispersant significantly reduced the rheological parameters of the systems studied. The tests performed with the fluid loss controller and the retarder also resulted in suitable properties for application as chemical additives in cement slurries
dc.publisherUniversidade Federal do Rio Grande do Norte
dc.publisherBR
dc.publisherUFRN
dc.publisherPrograma de Pós-Graduação em Ciência e Engenharia do Petróleo
dc.publisherPesquisa e Desenvolvimento em Ciência e Engenharia de Petróleo
dc.rightsAcesso Aberto
dc.subjectDispersante
dc.subjectControlador de filtrado Cimentação primária
dc.subjectPasta de cimento
dc.subjectPoços de petróleo
dc.subjectDispersant
dc.subjectFluid loss control
dc.subjectPrimary cementing
dc.subjectcement slurries
dc.subjectoil-wells
dc.titleDesenvolvimento de sistemas de aditivos químicos para aplicação em cimentações de poços de petróleo
dc.typedoctoralThesis


Este ítem pertenece a la siguiente institución