Synthesis and characterization of PLZT (9/65/35) by the Pechini method and partial oxalate

dc.contributorUniversidade Federal do Rio Grande do Norte (UFRN)
dc.contributorUniversidade Federal de São Carlos (UFSCar)
dc.contributorUniversidade Estadual Paulista (Unesp)
dc.date.accessioned2014-05-20T15:19:58Z
dc.date.accessioned2022-10-05T16:03:08Z
dc.date.available2014-05-20T15:19:58Z
dc.date.available2022-10-05T16:03:08Z
dc.date.created2014-05-20T15:19:58Z
dc.date.issued1998-05-01
dc.identifierMaterials Letters. Amsterdam: Elsevier B.V., v. 35, n. 3-4, p. 166-171, 1998.
dc.identifier0167-577X
dc.identifierhttp://hdl.handle.net/11449/31339
dc.identifier10.1016/S0167-577X(97)00240-1
dc.identifierWOS:000074363500006
dc.identifier.urihttp://repositorioslatinoamericanos.uchile.cl/handle/2250/3904123
dc.description.abstractZrTiO4 (ZT), obtained by the Pechini method, was used as precursor for obtaining PLZT (lead lanthanum zirconium titanate). An aqueous solution of oxalic acid was prepared with particles of ZT, Pb(NO3)(2) and La2O3. After the PbC2O4 and La2O3 precipitate on ZT particles, the materials were calcined and X-ray diffraction (XRD) showed the cubic phase of PLZT. This material was sintered, in two steps, and a density of about 8.0 g/cm(3) was obtained. After the second sintering the XRD pattern showed the occurrence of tetragonal and rhombohedral phases. This was caused by a stoichiometric deviation and the material showed a high optical transparency. (C) 1998 Elsevier B.V. B.V. All rights reserved.
dc.languageeng
dc.publisherElsevier B.V.
dc.relationMaterials Letters
dc.relation2.687
dc.rightsAcesso restrito
dc.sourceWeb of Science
dc.subjectsynthesis
dc.subjectPechini process
dc.subjectzirconium titanate
dc.subjectZrTiO4
dc.subjectPb containing ZrTiO4 (PLZT)
dc.titleSynthesis and characterization of PLZT (9/65/35) by the Pechini method and partial oxalate
dc.typeArtigo


Este ítem pertenece a la siguiente institución