Influencia de los Parámetros Geométricos de un Tenedor de Bicicleta en su Desempeño Aerodinámico

dc.contributorOchoa Álvarez, Oscar Mauricio
dc.contributorRamírez Pastran, Jesus Antonio
dc.contributorhttps://scienti.colciencias.gov.co/cvlac/visualizador/generarCurriculoCv.do?cod_rh=0001497866
dc.creatorRoa Vargas, Hector Eduardo
dc.date.accessioned2019-07-10T21:53:24Z
dc.date.available2019-07-10T21:53:24Z
dc.date.created2019-07-10T21:53:24Z
dc.date.issued2019-06-10
dc.identifierRoa Vargas, H. E. (2019). "Influencia de los Parámetros Geométricos de un Tenedor de Bicicleta en su Desempeño Aerodinámico". 8.
dc.identifierhttp://hdl.handle.net/11634/17598
dc.identifierreponame:Repositorio Institucional Universidad Santo Tomás
dc.identifierinstname:Universidad Santo Tomás
dc.identifierrepourl:https://repository.usta.edu.co
dc.description.abstractIn this paper we present the results of a numerical study to determine the influence of some geometrical parameters on the drag and lift coefficients for two commercial geometries of road bicycle forks. The computational model was validated by a comparison of the drag and lift coefficients obtained with it against available data in the literature for a canonical case i.e., flow around a cylinder. The proposed base computational model was able to predict values of drag and lift coefficients with errors values under 5.07%. The results obtained from the validation process confirm that the base computational model proposed predicts the expected von Kármán vortex pattern. This model was used to predict the flow behavior through the selected fork geometries. For both geometries, values of drag and sustentation coefficients, as well as modes of oscillation are presented. From the results obtained, a new geometry for the bicycle’s fork is proposed.
dc.languagespa
dc.publisherUniversidad Santo Tomás
dc.publisherPregrado Ingeniería Mecánica
dc.publisherFacultad de Ingeniería Mecánica
dc.relationM. Belloli, S. Giappino, F. Robustelli, and C. Somaschini, “Drafting Effect in Cycling: Investigation by Wind Tunnel Tests,” Procedia Eng., vol. 147, pp. 38–43, 2016.
dc.relationA. L. Wenden, Mathematical Modeling for complex fluids and flows, vol. 3, no. September. Springer Heidelberg Dordrecht London New York, 1981.
dc.relationD. M. Fintelman, H. Hemida, M. Sterling, and F. X. Li, “CFD simulations of the flow around a cyclist subjected to crosswinds,” J. Wind Eng. Ind. Aerodyn., vol. 144, pp. 31–41, 2015.
dc.relationJ. Katz, Introduction to Computational Fluid Dynamics, vol. M. 2012.
dc.relationM. Godo, D. Corson, and S. Legensky, “An Aerodynamic Study of Bicycle Wheel Performance Using CFD,” vol. 12065, pp. 1–21, 2013.
dc.relationN. Kanaris, X. Albets, D. Grigoriadis, and S. Kassinos, “Three-dimensional numerical simulations of magnetohydrodynamic flow around a confined circular cylinder under low, moderate, and strong magnetic fields,” Phys. Fluids, vol. 25, no. 7, 2013.
dc.relationR. Dqg, “Modelamiento computacional de la calle de vortices de karman por dinamica de vorticidad,” Mecánica Comput., vol. 19, no. October, p. 279, 2002.
dc.relationP. Goyal, A. Dutta, G. R. Reddy, R. K. Singh, and V. Bhabha, “Numerical Investigation of Strouhal Frequencies of Two Staggered Bluff Bodies,” no. ii, pp. 1–6, 2013.
dc.relationJ. A. R. Pastran, “Investigacion numerica de un flujo incompresible turbulento cargado con partıculas solidas suspendidas a traves de un canal con perturbaciones de pared controladas.,” Univ. Nac. Colomb., p. 225, 2018.
dc.relationD. C. Wilcox, “Turbulence Modeling for CFD,” Clim. Chang. 2013 - Phys. Sci. Basis, vol. 289, no. 9, pp. 1–30, 1995.
dc.relationW. K. George, “Lectures in Turbulence for the 21st Century,” Dep. Appl. Mech. Chalmers Univ. Technol. Gothenburg, Sweden, no. January, p. 303, 2010.
dc.relationM. Hill et al., FUNDAMENTAL OF AERODYNAMICS, 2nd ed., vol. 2, no. SECOND. M.Hill, 2002.
dc.relationJ. H. F. M. Peric, Computational Methods For Fluid Dynamics, 3rd ed., vol. 6, no. 2. Berlin: Library of Congress Cataloging-in-Publication Data, 1393.
dc.relationO. M. Ochoa Alvarez, “Estudio computacional de la respuesta operacional de un ducto convergente-divergente bajo condiciones de flujo compresible, turbulento,” p. 109, 2015.
dc.rightshttp://creativecommons.org/publicdomain/zero/1.0/
dc.rightsAbierto (Texto Completo)
dc.rightsinfo:eu-repo/semantics/openAccess
dc.rightshttp://purl.org/coar/access_right/c_abf2
dc.rightsCC0 1.0 Universal
dc.titleInfluencia de los Parámetros Geométricos de un Tenedor de Bicicleta en su Desempeño Aerodinámico


Este ítem pertenece a la siguiente institución