OBD-II vehicle data capture and monitoring system prototype

dc.creatorAciti, Claudio
dc.creatorUrraco, Mauricio
dc.creatorTodorovich, Elías
dc.date2018-10
dc.date2018
dc.date2019-03-20T13:19:10Z
dc.date.accessioned2019-11-21T15:17:41Z
dc.date.available2019-11-21T15:17:41Z
dc.identifierhttp://sedici.unlp.edu.ar/handle/10915/73358
dc.identifierisbn:978-950-658-472-6
dc.identifier.urihttp://repositorioslatinoamericanos.uchile.cl/handle/2250/3049769
dc.descriptionIn this work, a prototype of a system for capturing vehicle parameters according to OBD-II technology was designed and built. The prototype is able to read different magnitudes generated by a car through an ELM-327 USB interface that allows communication with the vehicle on-board computer, and the data obtained through a USB GPS. A 3G modem and a USB Wifi adapter were added to the developed prototype. The system was implemented on a Raspberry Pi B platform with the Raspbian operating system. The 3G modem was used to transmit information collected over the Internet to a remote device or exchange. The USB WiFi adapter allowed the Raspberry Pi to be configured as an Access Point. In this way, it could be connected to a mobile device that supports the Android operating system to visualize the data read. The tests were conducted on a Chevrolet Corsa Wagon Life Gls 1.4 4p model 2009.
dc.descriptionXIII Workshop Arquitectura, Redes (WARSO)
dc.descriptionRed de Universidades con Carreras en Informática (RedUNCI)
dc.formatapplication/pdf
dc.format777-786
dc.languageen
dc.relationXXIV Congreso Argentino de Ciencias de la Computación (La Plata, 2018).
dc.rightshttp://creativecommons.org/licenses/by-nc-sa/4.0/
dc.rightsCreative Commons Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0)
dc.subjectCiencias Informáticas
dc.titleOBD-II vehicle data capture and monitoring system prototype
dc.typeObjeto de conferencia
dc.typeObjeto de conferencia


Este ítem pertenece a la siguiente institución