Actas de congresos
Development of a DC-DC converter for DC bus voltage control of series connected device
Fecha
2009-12-01Registro en:
2009 Brazilian Power Electronics Conference, COBEP2009, p. 472-478.
10.1109/COBEP.2009.5347685
2-s2.0-77949955873
Autor
Universidade de São Paulo (USP)
Universidade Estadual Paulista (Unesp)
Institución
Resumen
The purpose of this work is to study voltage control and energy balance of a split DC bus topology within a power electronics equipment connected to the AC mains, such as UPS systems, wind power generators, active filters and FACTS devices. A typical configuration in such equipment has two mains connected converters sharing a common DC bus, one series connected and the other parallel connected. The DC bus is usually composed by a battery or a capacitor bank. In the proposed topology, the DC bus is divided in two sides, interconnected with a buck-boost converter, which controls power flow and DC voltage on both sides. © 2009 IEEE.
Materias
Ítems relacionados
Mostrando ítems relacionados por Título, autor o materia.
-
Voltage Stability Analysis based on Power Voltage (P-V) and Reactive Voltage (Q-V) Curves in Transmission Lines Using Static Var Compensator (SVC) with the Power Factory Program
Chauca Saavedra, Mario Bernabe (Universidad Nacional Tecnológica de Lima Sur, 2021)Due to the great demand for energy, electrical power systems, when subjected to voltage stress, present voltage instability, generating blackouts in the system with economic losses and in the components. Through a static ... -
Inclusão de proteção contra colapso de tensão de sistemas de potência em relês de subtensão
Fernandes, Luiz Augusto Pereira