Screen printed barium titanate thick films prepared from mechanically activated powders

dc.contributorUniversidade Estadual Paulista (Unesp)
dc.date.accessioned2014-05-27T11:20:19Z
dc.date.available2014-05-27T11:20:19Z
dc.date.created2014-05-27T11:20:19Z
dc.date.issued2001-11-09
dc.identifierKey Engineering Materials, v. 206-213, n. II, p. 1425-1428, 2001.
dc.identifier1013-9826
dc.identifierhttp://hdl.handle.net/11449/66612
dc.identifier10.4028/www.scientific.net/KEM.206-213.1425
dc.identifier2-s2.0-0034782956
dc.identifier1922357184842767
dc.identifier0000-0003-1300-4978
dc.description.abstractBarium titanate thick films were prepared from mechanically activated powders based on BaCO 3 and TiO 2. The thick films were screen-printed on alumina substrates electroded with Ag/Pd. The BT films were sintered at 850°C for 1 hour. The thickness was 30-75 μm depending of number of layers. The microstructure of thick films and the compatibility between BT layers and substrate was investigated by SEM. The dielectric properties were measured and the results were reported.
dc.languageeng
dc.relationKey Engineering Materials
dc.relation0,180
dc.rightsAcesso aberto
dc.sourceScopus
dc.subjectBarium titanate
dc.subjectMicrostructure
dc.subjectProperties
dc.subjectScreen-printed
dc.subjectThick films
dc.subjectMechanically activated powders
dc.subjectDielectric films
dc.subjectPermittivity measurement
dc.subjectPowders
dc.subjectScanning electron microscopy
dc.subjectScreen printing
dc.titleScreen printed barium titanate thick films prepared from mechanically activated powders
dc.typeActas de congresos


Este ítem pertenece a la siguiente institución