Artículos de revistas
INFLUENCIA DEL POLIVINIL ALCOHOL 88% HIDROLIZADO SOBRE LAS PROPIEDADES FINALES DEL S-PVC
Autor
Semprún, Richard D. (rsemprun@indesca.com)
Institución
Resumen
RESUMEN: El estudio estuvo orientado a evaluar los efectos del Poli (vinil alcohol) PVA (con grado de hidrólisis 88) sobre las
propiedades fi nales del S-PVC. Se sintetizó Poli (cloruro de vinilo) vía Suspensión (S-PVC) a través de la metodología
patentada para producción de S-PVC bajo el número US 5362828, pero a escala de laboratorio. Una serie de reacciones
en un reactor piloto de 35 litros fueron llevadas a cabo. Una mezcla de agentes de superfi cie activa donde se incluyen
dos alcoholes polivinílicos con medio y alto grado de hidrólisis (PVA72.5 y PVA88) e Hidroxipropilmetilcelulosa
(HPMC) fueron usados para mantener estable la suspensión durante la polimerización. La concentración del PVA88
fue sistemáticamente variada mientras que el resto de los surfactantes fueron mantenidos constantes. La respuesta del
tamaño promedio de partícula, la densidad aparente y la porosidad en el S-PVC para los cambios de concentración de
PVA88 fueron determinados. La respuesta del tamaño promedio de partícula y la densidad aparente fueron similares,
en general, ambas propiedades decrecieron a medida que la concentración de PVA88 fue incrementada alcanzando
un ligero máximo, que aunque predecido por la regresión, no pudo ser confi rmado estadísticamente desde datos
experimentales. La respuesta de la porosidad mostró mínimos bien defi nidos. ABSTRACT: The study was oriented to evaluate the effects of polyvinyl alcohol, with a degree of hydrolysis of 88%, on
the fi nal properties of the S-PVC. A suspension of polyvinyl Chloride (S-PVC) was produced in a series of pilot
plant reactions performed in a 35 liter reactor. A blend of surface-active agents including two polyvinyl alcohols
with medium and high degree of hydrolysis (72.5 and 88) and hydroxypropylmethyl cellulose was used to keep
the suspension stable throughout the polymerization. The concentration of polyvinyl alcohol with a high degree
of hydrolysis (PVA88) was systematically varied while that of the other surface-active agent was kept constant.
The responses of the mean particle size, the bulk density and the S-PVC porosity to PVA88 concentration changes
were determined. The behavior of the responses of the mean particle size and the bulk density were similar. In
general both properties decreased as the concentration of polyvinyl alcohol increased, reaching a slight maximum
that although predicted by the regression, could not be confi rmed statistically from the experimental data. The
response of the porosity showed a well-defi ned minimum.