The parabens, alkylic esters of p-hydroxybenzoic acid, were synthesized using trifluoromethanesulfonic acid immobilized on zirconium oxide (zirconia) as catalyst. The oxide was obtained by the sol–gel method, using urea as a pore-forming agent. After removing urea by extraction with water, the solid was dried and then calcined at 100, 205, 310 and 425 ◦C for 24 h. Afterward, it was impregnated with trifluoromethanesulfonic acid in toluene at reflux and leached to remove the weakly adsorbed acid. Mesoporous materials were obtained, whose mean pore diameter increased with the temperature of the thermal treatment of the support, while the specific surface area and the amount of acid bonded to the support decreased. The samples are crystalline from 400 ◦C and are thermally stable up to 250 ◦C. The catalysts have strong acidity and the number of acid sites decreased with the acid content in the support. The catalytic activity in the synthesis of propyl paraben, expressed as moles of ester formed at 5 h/mol acid in the catalyst, decreased when samples obtained from supports thermally treated at higher temperature were used. The activity also slightly diminished for the synthesis of different parabens in the order propyl > ethyl > methyl ester.Fil: Blanco, Mirta Noemi. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico La Plata. Centro de Investigación y Desarrollo en Ciencias Aplicadas; ArgentinaFil: Pizzio, Luis Rene. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico La Plata. Centro de Investigación y Desarrollo en Ciencias Aplicadas; ArgentinaFil: Gorsd, Marina Noelia. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico La Plata. Centro de Investigación y Desarrollo en Ciencias Aplicadas; Argentina