Artículos de revistas
Improved Selective Cholesterol Adsorption By Molecularly Imprinted Poly(methacrylic Acid)/silica (pmaa-sio2) Hybrid Material Synthesized With Different Molar Ratios
Registro en:
Materials Science And Engineering C. Elsevier Ltd, v. 44, n. , p. 99 - 108, 2014.
9284931
10.1016/j.msec.2014.08.008
2-s2.0-84906548941
Autor
Clausen D.N.
Pires I.M.R.
Tarley C.R.T.
Institución
Resumen
The present paper describes the synthesis of molecularly imprinted polymer - poly(methacrylic acid)/silica and reports its performance feasibility with desired adsorption capacity and selectivity for cholesterol extraction. Two imprinted hybrid materials were synthesized at different methacrylic acid (MAA)/tetraethoxysilane (TEOS) molar ratios (6:1 and 1:5) and characterized by FT-IR, TGA, SEM and textural data. Cholesterol adsorption on hybrid materials took place preferably in apolar solvent medium, especially in chloroform. From the kinetic data, the equilibrium time was reached quickly, being 12 and 20 min for the polymers synthesized at MAA/TEOS molar ratio of 6:1 and 1:5, respectively. The pseudo-second-order model provided the best fit for cholesterol adsorption on polymers, confirming the chemical nature of the adsorption process, while the dual-site Langmuir-Freundlich equation presented the best fit to the experimental data, suggesting the existence of two kinds of adsorption sites on both polymers. The maximum adsorption capacities obtained for the polymers synthesized at MAA/TEOS molar ratios of 6:1 and 1:5 were found to be 214.8 and 166.4 mg g- 1, respectively. The results from isotherm data also indicated higher adsorption capacity for both imprinted polymers regarding to corresponding non-imprinted polymers. Nevertheless, taking into account the retention parameters and selectivity of cholesterol in the presence of structurally analogue compounds (5-α-cholestane and 7-dehydrocholesterol), it was observed that the polymer synthesized at the MAA/TEOS molar ratio of 6:1 was much more selective for cholesterol than the one prepared at the ratio of 1:5, thus suggesting that selective binding sites ascribed to the carboxyl group from MAA play a central role in the imprinting effect created on MIP. © 2014 Elsevier B.V. 44
99 108 Gupta, R., Kumar, A., Synthesis and characterization of sol-gel-derived molecular imprinted polymeric materials for cholesterol recognition (2011) J. Sol-Gel Sci. Technol., 58, pp. 182-194 Puocci, F., Iemma, F., Cirillo, G., Muzzalupo, R., Spizzirri, U.G., Trombino, S., Cassano, R., Molecularly imprinted polymers based on amidic functional monomers for selective recognition of cholesterol in aqueous media (2006) Macromol. Indian J., 2, pp. 2-4 Ye, L., Yu, Y., Mosbach, K., Towards the development of molecularly imprinted artificial receptors for the screening of estrogenic chemicals (2001) Analyst, 126 (6), pp. 760-765. , DOI 10.1039/b009048o Puoci, F., Iemma, F., Muzzalupo, R., Spizzirri, U.G., Trombino, S., Cassano, R., Picci, N., Spherical Molecularly Imprinted Polymers (SMIPs) via a Novel Precipitation Polymerization in the Controlled Delivery of Sulfasalazine (2004) Macromolecular Bioscience, 4 (1), pp. 22-26. , DOI 10.1002/mabi.200300035 Cheong, S.H., McNiven, S., Rachkov, A., Levi, R., Yano, K., Karube, I., Testosterone receptor binding mimic constructed using molecular imprinting (1997) Macromolecules, 30 (5), pp. 1317-1322 Cunliffe, D., Kirby, A., Alexander, C., Molecularly imprinted drug delivery systems (2005) Advanced Drug Delivery Reviews, 57 (12), pp. 1836-1853. , DOI 10.1016/j.addr.2005.07.015, PII S0169409X05001547, Molecularly Imprinted Polymers: Technology and Applications Lv, Y.-K., Wang, L.-M., Yang, L., Zhao, C.-X., Sun, H.-W., Synthesis and application of molecularly imprinted poly(methacrylic acid)-silica hybrid composite material for selective solid-phase extraction and high-performance liquid chromatography determination of oxytetracycline residues in milk (2012) J. Chromatogr. A, 1227, pp. 48-53 Jing, T., Gao, X., Wang, P., Wang, Y., Lin, Y., Determination of trace tetracycline antibiotics in foodstuffs by liquid chromatography-tandem mass spectrometry coupled with selective molecular-imprinted solid-phase extraction (2009) Anal. Bioanal. Chem., 393, pp. 2009-2018 Martin-Esteban, A., Frenesius, J., Molecularly imprinted polymers: New molecular recognition materials for selective solid-phase extraction of organic compounds (2001) J. Anal. Chem., 370, pp. 795-802 Tamayo, F.G., Turiel, E., Martin-Esteban, A., Molecularly imprinted polymers for solid-phase extraction and solid-phase microextraction: Recent developments and future trends (2007) Journal of Chromatography A, 1152 (1-2), pp. 32-40. , DOI 10.1016/j.chroma.2006.08.095, PII S0021967306016864, Advances in Sample Preparation Part I Caro, E., Marce, R.M., Cormack, P.A.G., Sherrington, D.C., Borrull, F., Synthesis and application of an oxytetracycline imprinted polymer for the solid-phase extraction of tetracycline antibiotics (2005) Analytica Chimica Acta, 552 (1-2), pp. 81-86. , DOI 10.1016/j.aca.2005.07.047, PII S0003267005012869 Jing, T., Wang, Y., Dai, Q., Xia, H., Niu, J., Hao, Q., Mei, S., Zhou, Y., Preparation of mixed-templates molecularly imprinted polymers and investigation of the recognition ability for tetracycline antibiotics (2010) Biosens. Bioelectron., 25, pp. 2218-2224 Pilau, E.J., Silva, R.G.C., Jardim, I.C.F.S., Augusto, F., Molecularly imprinted sol-gel silica for solid phase extraction of phenobarbital (2008) J. Braz. Chem. Soc., 19, pp. 1136-1143 Silva, R.G.C., Augusto, F., Sol-gel molecular imprinted ormosil for solid-phase extraction of methylxanthines (2006) J. Chromatogr. A, 1114, pp. 216-223 Tarley, C.R.T., Andrade, F.N., Santana, H., Zaia, D.A.M., Beijo, L.A., Segatelli, M.G., Ion-imprinted polyvinylimidazole-silica hybrid copolymer for selective extraction of Pb(II): Characterization and metal adsorption kinetic and thermodynamic studies (2012) React. Funct. Polym., 72, pp. 83-91 Tarley, C.R.T., Andrade, F.N., De Oliveira, F.M., Corazza, M.Z., De Azevedo, L.F.M., Segatelli, M.G., Synthesis and application of imprinted polyvinylimidazole-silica hybrid copolymer for Pb2 + determination by flow-injection thermospray flame furnace atomic absorption spectrometry (2011) Anal. Chim. Acta., 703, pp. 145-151 Teixeira Tarley, C.R., Taboada Sotomayor, M.D.P., Kubota, L.T., Biomimetic polymers in analytical chemistry. Part 1: Preparation and applications of MIP (molecularly imprinted polymers) in extraction and separation techniques (2005) Quimica Nova, 28 (6), pp. 1076-1086. , http://www.scielo.br/pdf/qn/v28n6/26840.pdf Ciardelli, G., Borrelli, C., Silvestri, D., Cristallini, C., Barbani, N., Giusti, P., Supported imprinted nanospheres for the selective recognition of cholesterol (2006) Biosens. Bioelectron., 21, pp. 2329-2338 Zhong, N., Byun, H.-S., Bittman, R., Hydrophilic cholesterol-binding molecular imprinted polymers (2001) Tetrahedron Letters, 42 (10), pp. 1839-1841. , DOI 10.1016/S0040-4039(01)00045-4, PII S0040403901000454 Puoci, F., Curcio, M., Cirillo, G., Iemma, F., Spizzirri, U.G., Picci, N., Molecularly imprinted solid-phase extraction for cholesterol determination in cheese products (2008) Food Chemistry, 106 (2), pp. 836-842. , DOI 10.1016/j.foodchem.2007.06.043, PII S0308814607006401 Yavuz, H., Karakoc, V., Turkmen, D., Say, R., Denizli, A., Synthesis of cholesterol imprinted polymeric particles (2007) International Journal of Biological Macromolecules, 41 (1), pp. 8-15. , DOI 10.1016/j.ijbiomac.2006.11.011, PII S0141813006003308 Kitahara, K., Yoshihama, I., Hanada, T., Kokuba, H., Arai, S., Synthesis of monodispersed molecularly imprinted polymer particles for high-performance liquid chromatographic separation of cholesterol using templating polymerization in porous silica gel bound with cholesterol molecules on its surface (2010) J. Chromatogr. A, 1217, pp. 7149-7254 Lin, C.I., Joseph, A.K., Chang, C.K., Wang, Y.C., Lee, Y.D., Synthesis of molecular imprinted organic-inorganic hybrid polymer binding caffeine (2003) Analytica Chimica Acta, 481 (2), pp. 175-180. , DOI 10.1016/S0003-2670(03)00095-3 Lv, Y.-K., Wang, L.-M., Yang, S.-L., Wang, X.-H., Sun, W.-H., Synthesis and characterization of molecularly imprinted poly(methacrylic acid)/silica hybrid composite materials for selective recognition of lincomycin in aqueous media (2012) J. Appl. Polym. Sci., 126, pp. 1631-1636 Renkecz, T., Mistlberger, G., Pawlak, M., Hováth, V., Bakker, E., Molecularly imprinted polymer microspheres containing photoswitchable spiropyran based binding sites (2013) Appl. Mater. Interfaces, 5, pp. 8537-8545 Corma, A., From microporous to mesoporous molecular sieve materials and their use in catalysis (1997) Chemical Reviews, 97 (6), pp. 2373-2419 Jamieson, A., McNeill, I.C., The thermal degradation of copolymers of methyl methacrylate with methacrylic acid (1974) Eur. Polym. J., 10, pp. 217-247 Duran, C., Ozdes, D., Gundogdu, A., Imamoglu, M., Senturk, H.B., Tea-industry waste activated carbon, as a novel adsorbent, for separation, preconcentration and speciation of chromium (2011) Anal. Chim. Acta., 688, pp. 75-83 Li, Y., Yue, Q., Gao, B., Adsorption kinetics and desorption of Cu(II) and Zn(II) from aqueous solution onto humic acid (2010) J. Hazard. Mater., 178, pp. 455-461 Zolgharnein, J., Shahmoradi, A., Adsorption of Cr(VI) onto Elaeagnus tree leaves: Statistical optimization, equilibrium modeling, and kinetic studies (2010) J. Chem. Eng. Data, 55, pp. 3428-3437 Plazinski, W., Rudzinski, W., Plazinska, A., Theoretical models of sorption kinetics including a surface reaction mechanism: A review (2009) Adv. Colloid Interf. Sci., 152, pp. 2-13 Diniz, K.M., Segatelli, M.G., Tarley, C.R.T., Synthesis and adsorption studies of novel hybrid mesoporous copolymer functionalized with protoporphyrin for batch and on-line solid-phase extraction of Cd2 + ions (2013) React. Funct. Polym., 73, pp. 838-846 Cáceres, L., Escudey, M., Fuentes, E., Báez, M.E., Modeling the sorption kinetic of metsulfuron-methyl on Andisols and Ultisols volcanic ash-derived soils: Kinetics parameters and solute transport mechanisms (2010) J. Hazard. Mater., 179, pp. 795-803 Wang, Z., Ainsworth, C.C., Friedrich, D.M., Gassman, P.L., Joly, A.G., Kinetics and mechanism of surface reaction of salicylate on alumina in colloidal aqueous suspension (2000) Geochimica et Cosmochimica Acta, 64 (7), pp. 1159-1172. , DOI 10.1016/S0016-7037(99)00360-9, PII S0016703799003609 Arasteh, R., Masoumi, M., Rashidi, A.M., Moradi, L., Samimi, V., Mostafavi, S.T., Adsorption of 2-nitrophenol by multi-wall carbon nanotubes from aqueous solutions (2010) Appl. Surf. Sci., 256, pp. 4447-4455 Carvalho, T.E.M., Fungaro, D.A., Izidoro, J.C., Adsorção do corante reativo laranja 16 de soluções aquosas por zeólita sintética (2010) Quim. Nova, 33, pp. 358-363 Wang, S., Xu, J., Tong, Y., Wang, L., He, C., Cholesterol-imprinted polymer receptor prepared by a hybrid imprinting method (2005) Polymer International, 54 (9), pp. 1268-1274. , DOI 10.1002/pi.1841 Sreenivasan, K., Sivakumar, R., Ferric iron-containing molecularly imprinted polymer as an adsorbent for cholesterol (2003) Adsorption Science and Technology, 21 (3), pp. 261-268. , DOI 10.1260/026361703322404403 Shengzu, Z., Min, Z., Fan, D., Qi, X., Xiao, M., Preparation of cholesterol imprinted polymerized organogel and selectivity adsorption ability (2011) Acta Polym. Sin., 4, pp. 390-394 Zengin, A., Yildirim, E., Tamer, U., Caykara, T., Molecularly imprinted superparamagnetic iron oxide nanoparticles for rapid enrichment and separation of cholesterol (2013) Analyst, 138, pp. 7238-7245