Porous bioresorbable polymers have been widely used as scaffolds in tissue engineering. Most of the bioresorbable scaffolds are aliphatic polyesters and the methods employed to prepare the porous morphology may vary. This work describes and evaluates the in vitro degradation of porous and dense scaffolds of poly(ε-caprolactone) (PCL) and poly(D,L-lactic acid-co-glycolic acid) (50/50) (PLGA50) prepared by particulate leaching-melt compression process. Biological evaluation was carried out using osteoblast cell cultures. The results showed an autocatalytic effect on the dense samples. Osteoblasts presented intermediate adhesion and the cell morphology on the surface of these materials was dispersed, which indicated a good interaction of the cells with the surface and the material. © Springer Science+Business Media, LLC 2011.221023772385Gloria, A., De Santis, R., Ambrosio, L., Polymer-based composite scaffolds for tissue engineering (2010) J Appl Biomater Biomech., 8 (2), pp. 57-67Vert, M., Degradable and bioresorbable polymers in surgery and in pharmacology: Beliefs and facts (2009) J Mater Sci Mater Med., 20 (2), pp. 437-446Kretlow, J.D., Klouda, L., Mikos, A.G., Injectable matrices and scaffolds for drug delivery in tissue engineering (2007) Advanced Drug Delivery Reviews, 59 (4-5), pp. 263-273. , DOI 10.1016/j.addr.2007.03.013, PII S0169409X07000282, Matrices and Scaffolds for Drug Delivery in Tissue EngineeringBarbanti, S.H., Santos Jr., A.R., Zavaglia, C.A.C., Duek, E.A.R., Porous and dense poly(L-lactic acid) and poly(D,L-lactic acid-co-glycolic acid) scaffolds: In vitro degradation in culture medium and osteoblasts culture (2004) Journal of Materials Science: Materials in Medicine, 15 (12), pp. 1315-1321. , DOI 10.1007/s10856-004-5740-6Mooney, D.J., Baldwin, D.F., Suh, N.P., Vacanti, J.P., Langer, R., Novel approach to fabricate porous sponges of poly(D,L-lactic-co-glycolic acid) without the use of organic solvents (1996) Biomaterials, 17 (14), pp. 1417-1422. , DOI 10.1016/0142-9612(96)87284-XEldsäter, C., Erlandsson, B., Renstad, R., Albertsson, A.C., Karlsson, S., The biodegradation of amorphous and crystalline regions in filmblown poly(e-caprolactone) (2000) Polymer, 41, pp. 1297-1304Murakami, N., Fukuchi, S., Takeuchi, K., Hori, T., Shibamoto, S., Ito, F., Antagonistic regulation of cell migration by epidermal growth factor and glucocorticoid in human gastric carcinoma cells (1998) Journal of Cellular Physiology, 176 (1), pp. 127-137. , DOI 10.1002/(SICI)1097-4652(199807)176:1<127::AID-JCP15>3.0.CO;2-4Eglin, D., Alini, M., Degradable polymeric materials for osteosynthesis: Tutorial (2008) Eur Cell Mater., 16, pp. 80-91Li, S., Hydrolytic degradation characteristics of aliphatic polyesters derived from lactic and glycolic acids (1999) Journal of Biomedical Materials Research, 48 (3), pp. 342-353. , DOI 10.1002/(SICI)1097-4636(1999)48:3<342::AID-JBM20>3.0.CO;2-7Widmer, M.S., Gupta, P.K., Lu, L., Meszlenyi, R.K., Evans, G.R.D., Brandt, K., Savel, T., Mikos, A.G., Manufacture of porous biodegradable polymer conduits by an extrusion process for guided tissue regeneration (1998) Biomaterials, 19 (21), pp. 1945-1955. , PII S0142961298000994Mikos, A.G., Temenoff, J.S., Formation of highly porous biodegradable scaffolds for tissue engineering (2000) Electronic Journal of Biotechnology, 3 (2), pp. 114-119. , http://www.ejb.org/content/vol3/issue2/full/5Plikk, P., Målberg, S., Albertsson, A.C., Design of resorbable porous tubular copolyester scaffolds for use in nerve regeneration (2009) Biomacromolecules, 10 (5), pp. 1259-1264Duek, E.A.R., Zavaglia, C.A.C., Belangero, W.D., In vitro study of poly(lactic acid) pin degradation (1999) Polymer, 40 (23), pp. 6465-6473. , PII S0032386198008465Wu, L., Jing, D., Ding, J., A "room-temperature" injection molding/particulate leaching approach for fabrication of biodegradable three-dimensional porous scaffolds (2006) Biomaterials, 27 (2), pp. 185-191. , DOI 10.1016/j.biomaterials.2005.05.105, PII S0142961205004941Penco, M., Sartore, L., Bignotti, F., D'antone, S., Landro, L., Thermal properties of a new class of block copolymers based on segments of poly(D,L-lactic-glycolic acid) and poly(e-caprolactone) (2000) J European Polym., 36, pp. 901-908Pietrzak, W.S., Sarver, D.R., Verstynen, M.L., Bioabsorbable polymer science for the practicing surgeon (1997) Journal of Craniofacial Surgery, 8 (2), pp. 87-91Kim, J.Y., Yoon, J.J., Park, E.K., Kim, D.S., Kim, S.Y., Cho, D.W., Cell adhesion and proliferation evaluation of SFF-based biodegradable scaffolds fabricated using a multi-head deposition system (2009) Biofabrication., 1 (1), p. 015002Ren, J., Zhao, P., Ren, T., Gu, S., Pan, K., Poly (D,L-lactide)/nano-hydroxyapatite composite scaffolds for bone tissue engineering and biocompatibility evaluation (2008) Journal of Materials Science: Materials in Medicine, 19 (3), pp. 1075-1082. , DOI 10.1007/s10856-007-3181-8Santos Jr., A.R., Barbanti, S.H., Duek, E.A.R., Dolder, H., Wada, R.S., Wada, M.L.F., Vero cell growth and differentiation on poly(L-lactic acid) membranes of different pore diameters (2001) Artificial Organs, 25 (1), pp. 7-13. , DOI 10.1046/j.1525-1594.2001.025001007.xMoreira, P.L., An, Y.H., Santos Jr., A.R., Genari, S.C., In vitro analysis of anionic collagen scaffolds for bone repair (2004) Journal of Biomedical Materials Research - Part B Applied Biomaterials, 71 (2), pp. 229-237. , DOI 10.1002/jbm.b.30026Lombello, C.B., Santos Jr., A.R., Malmonge, S.M., Barbanti, S.H., Wada, M.L.F., Duek, E.A.R., Adhesion and morphology of fibroblastic cells cultured on different polymeric biomaterials (2002) J Mater Sci Mater Med., 13, pp. 867-874Van Eijk, F., Saris, D.B., Creemers, L.B., Riesle, J., Willems, W.J., Van Blitterswijk, C.A., Verbout, A.J., Dhert, W.J., The effect of timing of mechanical stimulation on proliferation and differentiation of goat bone marrow stem cells cultured on braided PLGA scaffolds (2008) Tissue Eng., 14 (8), pp. 1425-1433Bessa, P.C., Casal, M., Reis, R.L., Bone morphogenetic proteins in tissue engineering: The road from laboratory to clinic, part II (BMP delivery) (2008) J Tissue Eng Regen Med., 2 (2-3), pp. 81-96