Buscar
Mostrando ítems 1-10 de 1096
Plasma-polymerized acetylene nanofilms modified by nitrogen ion implantation
(2013-06-15)
Thin films were prepared by plasma enhanced chemical vapour deposition (PECVD) from a mixture of acetylene and argon, and post deposition-treated by plasma immersion ion implantation (PIII). The effect of PIII on the ...
Plasma-polymerized acetylene nanofilms modified by nitrogen ion implantation
(2013-06-15)
Thin films were prepared by plasma enhanced chemical vapour deposition (PECVD) from a mixture of acetylene and argon, and post deposition-treated by plasma immersion ion implantation (PIII). The effect of PIII on the ...
Surface modifications by both anodic oxidation and ion beam implantation on electropolished titanium substrates
(2019-09-01)
The purpose of this work is to investigate the superficial induced characteristics on titanium surface by anodic oxidation and ion beam implantation, i.e. two surface modification technologies, by focusing on variations ...
Gold ion implantation into alumina using an “inverted ion source” configuration.
(AIP PublishingAIP Publishing LLCNova York, 2014-02-21)
We describe an approach to ion implantation in which the plasma and its electronics are held at
ground potential and the ion beam is injected into a space held at high negative potential, allowing
considerable savings ...
Investigation of Plasma Immersion Ion Implantation Process in Magnetic Mirror Geometry
(Institute of Electrical and Electronics Engineers (IEEE), 2011-11-01)
Plasma immersion ion implantation (PIII) with low external magnetic field has been investigated both numerically and experimentally. The static magnetic field considered is essentially nonuniform and is generated by two ...
Investigation of Plasma Immersion Ion Implantation Process in Magnetic Mirror Geometry
(Institute of Electrical and Electronics Engineers (IEEE), 2011-11-01)
Plasma immersion ion implantation (PIII) with low external magnetic field has been investigated both numerically and experimentally. The static magnetic field considered is essentially nonuniform and is generated by two ...
The improvement of thin polymer film properties through plasma immersion ion implantation and deposition technique
(2001-12-01)
Thin polymer films were deposited from acetylene and argon mixtures by plasma immersion ion implantation and deposition. The effect of the pulse frequency, v, on molecular structure, optical gap, contact angle and hardness ...
The improvement of thin polymer film properties through plasma immersion ion implantation and deposition technique
(2001-12-01)
Thin polymer films were deposited from acetylene and argon mixtures by plasma immersion ion implantation and deposition. The effect of the pulse frequency, v, on molecular structure, optical gap, contact angle and hardness ...
Investigation of Plasma Immersion Ion Implantation Process in Magnetic Mirror Geometry
(Institute of Electrical and Electronics Engineers (IEEE), 2014)
Plasma immersion ion implantation of nitrogen into H13 steel under moderate temperatures
(Elsevier B.V., 2005-10-01)
Ion implantation of nitrogen into samples of tempered and quenched H13 steel was carried out by plasma immersion technique. A glow discharge plasma of nitrogen species was the ion source and the negative high voltage pulser ...