Buscar
Mostrando ítems 1-10 de 66
Microstructure of the microalloyed NiAl-V eutectics
(Elsevier Science BvAmsterdamHolanda, 2002)
Effect of Equal Channel Angular Pressing (ECAP) on microstructure and properties of Al-FeAlCr intermetallic phase composites
(ABM, ABC, ABPol, 2014-06-01)
An aluminium matrix composite was prepared by mixing commercial aluminium powders and 15 vol % of FeAlCr powders and consolidation by hot extrusion. The extruded composite was subjected to severe plastic deformation by ...
Desenvolvimento de camadas ricas no intermetálico α-Alx(Fe,Mn,Cr)ySiz em ligas Al-Si por solidificação controlada
(Universidade Tecnológica Federal do ParanáPonta GrossaBrasilPrograma de Pós-Graduação em Engenharia MecânicaUTFPR, 2016-02-19)
The intermetallic with high mechanical properties and good thermal stability can act as reinforcement in the aluminum matrix. This study evaluated the formation and properties of layers rich in intermetallic α-Alx(Fe,Mn,Cr)ySiz ...
Investigation of intermetallics in hypoeutectic Al-Fe alloys by dissolution of the Al matrix
(Elsevier Sci LtdOxfordInglaterra, 2009)
Síntesis y caracterización microestructural de compósitos base-Al reforzados con partículas intermetálicas
(2018-05-03)
RESUMEN:
Actualmente las Aleaciones Metálicas Complejas (AMC) o intermetálicos han llamado mucho la atención como agentes reforzadores de compósitos de matrix metálica. Los reforzadores convencionales como los cerámicos ...
Physicochemical analysis of Ti-Si-B powder aalloys
(2012-11-26)
Titanium alloys of Ti-Si-B system were manufactured by blended elemental powder method using Ti, Si and B powders as starting materials. It was found that uniaxial and isostatic pressing followed by hot pressing at around ...
Physicochemical analysis of Ti-Si-B powder aalloys
(2012-11-26)
Titanium alloys of Ti-Si-B system were manufactured by blended elemental powder method using Ti, Si and B powders as starting materials. It was found that uniaxial and isostatic pressing followed by hot pressing at around ...
Influence of Niobium or Molybdenum Addition on Microstructure and Tensile Properties of Nickel-Chromium Alloys
(Mdpi, 2019-05-01)
This work discusses on influence of niobium or molybdenum addition on microstructure and tensile properties of NiCr-based dental alloys. In this regard, the Ni-24Cr-8Nb, Ni-22Cr-10Nb and Ni-20Cr-12Nb (wt. %) alloys produced ...
Characterization of phases in an Fe-Mn-Si-Cr-Ni shape memory alloy processed by different thermomechanical methods
(Elsevier Science Inc, 2015-11)
The presence of second phases in FeMnSi-based systems has been widely discussed in the literature, and also in our previous works. In this manuscript, various specimens of an Fe-15Mn-5Si-9Cr-5Ni wt.% (nominal composition) ...