Buscar
Mostrando ítems 1-10 de 385
Effect of Different Surface Treatments on the Bond Strength of the Hybrid Ceramic Characterization Layer
(2021-01-01)
Purpose: Using the microshear bond strength (pSBS) test, this study investigated the bond strength between a hybrid ceramic and the extrinsic characterization layer after different ceramic surface treatments. Materials and ...
Biaxial flexural strength and Weilbull characteristics of adhesively luted hybrid and reinforced CAD/CAM materials to dentin: effect of self-etching ceramic primer versus hydrofluoric acid etching
(2020-06-17)
This study evaluated the influence of the surface treatment and aging on the biaxial flexural strength of ceramic materials cemented to a dentin analogue. One hundred twenty disc-shaped specimens were allocated into 12 ...
Durability of staining and glazing on a hybrid ceramics after the three-body wear: Hybrid ceramic stain durability
(2020-09-01)
Hybrid ceramic is a promising material for monolithic restorations that could require an individualization through the extrinsic staining to improve aesthetics. Due to the possibilities to treat this ceramic prior to ...
Synthesis and structural characterization of carbon-rich SiCxOy derived from a Ni-containing hybrid polymer
(Elsevier Sci LtdOxfordInglaterra, 2008)
Influence of Ceramic Materials on Biomechanical Behavior of Implant Supported Fixed Prosthesis with Hybrid Abutment
(2019-05-30)
PURPOSE: This study evaluated the stress distribution in different cement-retained implant-supported prostheses with a hybrid abutment. MATERIALS AND METHODS: Two factors were evaluated: restorative material for the crown ...
Synthesis and electrical characterization of tungsten doped Pb(Zr0.53Ti0.47)O-3 ceramics obtained from a hybrid process
(Elsevier B.V., 2007-06-15)
Pure and W-doped PZT ceramics (PZT and PZTW) were prepared by a hybrid process consisting in the association of polymeric precursor and partial oxalate methods. The phase formation was investigated by simultaneous thermal ...
Synthesis and electrical characterization of tungsten doped Pb(Zr0.53Ti0.47)O-3 ceramics obtained from a hybrid process
(Elsevier B.V., 2007-06-15)
Pure and W-doped PZT ceramics (PZT and PZTW) were prepared by a hybrid process consisting in the association of polymeric precursor and partial oxalate methods. The phase formation was investigated by simultaneous thermal ...
Effect of surface treatment and glazing in the two-body wear resistance of a hybrid ceramic after polymeric staining application
(Taylor & Francis Ltd, 2021-02-18)
The present study evaluated the wear resistance of the characterization layer applied over a hybrid ceramic with different surface treatments against a zirconia antagonist. Eighty hybrid ceramic discs were prepared, polished ...
Influence of different restorative material and cement on the stress distribution of ceramic veneer in upper central incisor
(2020-03-01)
Considering new ceramic systems, doubts about the appropriate combination of ceramics and cement are common. Settings and Design: To evaluate the influence of the elastic modulus (E) of cement agents associated with different ...
Resin bonding to a hybrid ceramic: Effects of surface treatments and aging
(2016-03-01)
The aim of this study was to verify the effects of different surface treatments on the microtensile bond strength between resin cement and a hybrid ceramic. Thirty-two hybrid ceramic slices (831033 mm) were produced and ...