Buscar
Mostrando ítems 1-10 de 658
Effect of staining on the mechanical, surface and biological properties of lithium disilicate
(2022-02-01)
Purpose: To simulate biodegradation and wear of stained and glazed CAD lithium disilicate ceramic, and evaluate their effects on the microbial adherence and mechanical and surface properties of lithium disilicate ceramic ...
Spectrophotometric characterization of simple glazings for a modular façade
(ELSEVIER, 2016-09)
A large variety of transparent materials is available for uses in buildings façades and all glazing properties must be considered in
their choice. Such a selection should be a careful process of evaluation and weighing ...
Does the glaze application on Y-TZP surface improve the bond strength to pressed veneering ceramic?
(2020-01-01)
The objective of this study was to verify the influence of glaze application on the shear bond strength between Y-TZP and veneering ceramic. Thirty square-shaped blocks (12.5 × 15 × 1.5 mm) of sintered zirconia (Vita In ...
In vitro analysis of different properties of acrylic resins for ocular prosthesis submitted to accelerated aging with or without photopolymerized glaze
(2016-12-01)
The effect of a photopolymerized glaze on different properties of acrylic resin (AR) for ocular prostheses submitted to accelerated aging was investigated. Forty discs were divided into 4 groups: N1 AR without glaze (G1); ...
Microstructure and mechanical properties of fully sintered zirconia glazed with an experimental glass
(2021-01-01)
The need for improved mechanical properties in regions of higher masticatory loads led to the introduction of zirconia in dentistry. However, zirconia needs a characterization and glaze to have a more natural, tooth-like ...
Alcohol and light-polymerizing glaze effect on the physical and mechanical properties of a bisacrylate composite resin before and after immersion in chlorhexidine gluconate
(2021-01-01)
Statement of problem: The use of 0.12% chlorhexidine gluconate (CHX) may damage bisacrylate composite resin interim restorations, but whether they can be protected with an application of alcohol and/or the use of a glaze ...
Rheological characterization of full-fat and low-fat glaze materials for foods
(Elsevier, 2016-02)
The objective of this work was to perform the rheological characterization of full-fat and low-fat glaze materials used as film-forming fluids. Glaze materials were elaborated with icing sugar, skim milk powder, water, ...
Caracterização de uma cerâmica 3Y-TZP e avaliação do efeito de tratamentos de superfície na adesão da cerâmica ao glaze ou cimento resinoso
(Universidade Estadual Paulista (Unesp), 2015-02-12)
The aim of the present study was to evaluate the adhesive parameters between glaze and full-contour zirconia (FCZ) and overglazed FCZ and resin cement. Zirconia and glaze were tested to determined theirs properties. FCZ ...
Bonding strategies to full-contour zirconia: Zirconia pretreatment with piranha solution, glaze and airborne-particle abrasion
(2017-09-01)
This study aimed to evaluate the effect of various zirconia surface pretreatments on the adhesion between full contour 3Y-TZP zirconia and glaze, and the shear bond strength (SBS) between glazed/3Y-TZP and resin cement. ...