Buscar

Mostrando ítems 1-10 de 130

The microstructure of a Ni-Cr-Fe alloy after welding processes

MONTEIRO, W.A.; CALVO, W.A.P.; BUSO, S.J.; INTERNATIONAL CONGRESS ON ELECTRON MICROSCOPY, 14th (2014)

Metalografia em cores de uma liga Ni-Fe-Cr apos processos de soldagem

BUSO, S.J.; MONTEIRO, W.A.; CALVO, W.A.P.; CONGRESSO BRASILEIRO DE ENGENHARIA E CIENCIA DOS MATERIAIS, 13.; SEMINARIO DE MATERIAIS PARA O SETOR ELETRICO, 6. (2014)

Effect of nitrogen addition to shielding gas on cooling rates and in the microstructure of thin sheets of duplex stainless steel welded by pulsed gas tungsten arc welding process

BETINI, EVANDRO G.; GOMES, MAURILIO P.; MUCSI, CRISTIANO S.; ORLANDO, MARCOS T.D.; LUZ, TEMISTOCLES de S.; AVETTAND-FENOEL, MARIE-NOELLE; ROSSI, JESUALDO L. (2019)

Fatigue strength of tungsten inert gas-repaired weld joints in airplane critical structures

Universidade Estadual Paulista (Unesp); Universidade Federal do Rio de Janeiro (UFRJ) (Elsevier B.V. Sa, 2011-06-01)

In this work the effect of Gas Tungsten Arc Welding (GTAW) repairs on the axial fatigue strength of an AISI 4130 steel welded joint used in airframe critical to the flight-safety was investigated. Fatigue tests were performed ...

Fatigue strength of tungsten inert gas-repaired weld joints in airplane critical structures

Universidade Estadual Paulista (Unesp); Universidade Federal do Rio de Janeiro (UFRJ) (Elsevier B.V. Sa, 2011-06-01)

Study of the thermal diffusivity variation in thin duplex steel plates welded by GTAW process

BETINI, EVANDRO G.; GOMES, MAURILIO P.; MUCSI, CRISTIANO S.; LUZ, TEMISTOCLES de S.; ORLANDO, MARCOS T.D.; ROSSI, JESUALDO L. (2018)

Fatigue strength of tungsten inert gas-repaired weld joints in airplane critical structures

Nascimento, Marcelino P.; Voorwald, Herman Jacobus Cornelis; Payao Filho, Joao da C. (Elsevier B.V. Sa, 2014)

Characterization of titanium welded joints by the orbital gas tungsten arc welding process for aerospace application

Instituto de Aeronáutica e Espaço; Instituto Nacional de Pesquisas Espaciais; Univers. Estadual Paulista; Instituto Tecnológico de Aeronáutica; Universidade Estadual do Norte Fluminense (Departamento de Ciência e Tecnologia Aeroespacial, 2010)

In this work, three welding programs for orbital gas tungsten arc welding (GTAW), previously developed, were used, using pulsed current and increasing speed (#A), constant current (#B) and pulsed current and decreasing ...

Caracterizacao microestrutural e propriedades de juntas dissimilares entre acos inoxidaveis fabricados por processos de fusao

BAULY, JULIO C. (2000)

Caracterizacao microestrutural e propriedades de juntas dissimilares utilizadas no acoplamento do MAB dos reatores PWR

BAULY, J.C.; PAES de ANDRADE, A.H.; CONGRESSO GERAL DE ENERGIA NUCLEAR, 8.; ENCONTRO NACIONAL DE FISICA DE REATORES E TERMOHIDRAULICA, 12. (Rio de Janeiro: ABEN, 2000, 2014)

1
2
3
4
. . .
13

Buscar

Filtros

The microstructure of a Ni-Cr-Fe alloy after welding processes

Metalografia em cores de uma liga Ni-Fe-Cr apos processos de soldagem

Effect of nitrogen addition to shielding gas on cooling rates and in the microstructure of thin sheets of duplex stainless steel welded by pulsed gas tungsten arc welding process

Fatigue strength of tungsten inert gas-repaired weld joints in airplane critical structures

Fatigue strength of tungsten inert gas-repaired weld joints in airplane critical structures

Study of the thermal diffusivity variation in thin duplex steel plates welded by GTAW process

Fatigue strength of tungsten inert gas-repaired weld joints in airplane critical structures

Characterization of titanium welded joints by the orbital gas tungsten arc welding process for aerospace application

Caracterizacao microestrutural e propriedades de juntas dissimilares entre acos inoxidaveis fabricados por processos de fusao

Caracterizacao microestrutural e propriedades de juntas dissimilares utilizadas no acoplamento do MAB dos reatores PWR