Buscar
Mostrando ítems 1-10 de 268
Approximate analysis for regular buildings subject to horizontal loadsAnálisis aproximado para edificios regulares sujetos a cargas horizontales
(Facultad de Ciencias de la Ingeniería, Univesidad Austral de Chile., 2017)
In-plane and buckling analysis of variable angle tow composites
(Universidade Federal de Minas GeraisBrasilENG - DEPARTAMENTO DE ENGENHARIA ESTRUTURASPrograma de Pós-Graduação em Engenharia de EstruturasUFMG, 2021-03-03)
Advances in manufacturing techniques have allowed more flexibility to the design and new possibilities to apply composites materials in lightweight structures. Novel techniques such as the automated fiber placement allow ...
Effect of longitudinal stiffening on the ultimate resistance of plate girders subjected to patch loading
(2019-06)
Several investigations have shown that the ultimate resistance of plate girders subjected to patch loading is increased when a longitudinal stiffener is placed at the web panel of the steel girder. However, the influence ...
Effects of strain gradients in the onset of global buckling in slender walls due to earthquake loading.
Global buckling of slender walls, reported only in a few laboratory tests before 2010, became a critical issue in design of reinforced concrete buildings after it was observed following the 2010 Mw 8.8 Chile earthquake and ...
Estimación de la zona crítica de diseño en naves industriales con diferentes alturas libres que soporten puentes grúas de diferentes capacidades de carga
(Universidad Peruana de Ciencias Aplicadas (UPC)PE, 2021-05-08)
El presente estudio tiene como finalidad encontrar la zona crítica de diseño en naves industriales que combinen la premisa de diferentes alturas libres con la ubicación de distintas capacidades de carga de un puente grúa. ...
Use of biotechnological devices in the quantification of psychophysiological workload of professional chess players
(Journal of Medical Systems, 2018)
Critical undrained shear strength of sand-silt mixtures under monotonic loading
(Universidad Nacional de Colombia - Sede Bogotá - Facultad de Ciencias - Departamento de Geociencia, 2014-07-01)
This study uses experimental triaxial tests with monotonic loading to develop empirical relationships to estimate undrained critical shear strength. The effect of the fines content on undrained shear strength is analyzed ...
Describing fatigue crack growth and load ratio effects in Al 2524 T3 alloy with an enhanced exponential model
(ELSEVIER SCIENCE BVAMSTERDAM, 2013-08-02)
The fatigue crack behavior in metals and alloys under constant amplitude test conditions is usually described by relationships between the crack growth rate da/dN and the stress intensity factor range Delta K. In the present ...
Describing fatigue crack growth and load ratio effects in Al 2524 T3 alloy with an enhanced exponential model
(Elsevier B.V., 2012-08-01)
The fatigue crack behavior in metals and alloys under constant amplitude test conditions is usually described by relationships between the crack growth rate da/dN and the stress intensity factor range Delta K. In the present ...
Describing fatigue crack growth and load ratio effects in Al 2524 T3 alloy with an enhanced exponential model
(Elsevier B.V., 2012-08-01)
The fatigue crack behavior in metals and alloys under constant amplitude test conditions is usually described by relationships between the crack growth rate da/dN and the stress intensity factor range Delta K. In the present ...