Buscar
Mostrando ítems 1-10 de 12
Toughened Polystyrene Nanoparticles through High-Solids Miniemulsion Polymerization
(Elsevier, 2015-03)
Polystyrene nanoparticles toughened with polybutadiene were synthesized by miniemulsion polymerization of 50% solids content. The effects of recipes and reaction conditions on the polymerization kinetics, polymer microstructure, ...
Toughened polystyrene nanoparticles through high-solids miniemulsion polymerization
(Elsevier Science Sa, 2015-03)
Polystyrene nanoparticles toughened with polybutadiene were synthesized by miniemulsion polymerization of 50% solids content. The effects of recipes and reaction conditions on the polymerization kinetics, polymer microstructure, ...
Transparent multiphasic polystyrene/epoxy blends
(John Wiley & Sons Inc, 2002-12)
Blends of polystyrene (PS) with an epoxy monomer (DGEBA) and a tertiary amine (BDMA), were initially miscible at 120°C but phase‐separated at very low conversions in the course of polymerization. Although there was a ...
Phase Diagrams of Blends of Poly(phenylene ether), Polystyrene, and Diglycidyl Ether of Bisphenol A: Influence of the Molar Mass of Poly(phenylene ether)
(John Wiley & Sons Inc, 2006-05-06)
Phase diagrams of ternary blends of poly(phenylene ether) (PPE, M n = 1.2 and 12 kg mol-1), polystyrene (PS, Mn = 22.5 kg mol-1), and diglycidyl ether of bisphenol A (DGEBA) were experimentally obtained in an extended range ...
Comparison of morphologies and mechanical properties of crosslinked epoxies modified by polystyrene and poly(methyl methacrylate)) or by the corresponding block copolymer polystyrene-b-poly(methyl methacrylate)
(Elsevier, 2005-03)
Polystyrene (PS, Mn=28,400, PI=1.07), poly(methyl methacrylate) (PMMA, Mn=88,600, PI=1.03), and PS (50,000)-b-PMMA (54,000) (PI=1.04), were used as modifiers of an epoxy formulation based on diglycidyl ether of bisphenol ...
PS/EPDM blends prepared by in situ polymerization of styrene
(Wiley-blackwellMaldenEUA, 2008)
Thermal and mechanical properties of in situ polymerized PS/EPDM blends
(Pergamon-elsevier Science LtdOxfordInglaterra, 2006)
Influence of the Addition of Polystyrene-blockpoly(methyl methacrylate) Copolymer (PS-b-PMMA) on the Morphologies Generated by Reaction-Induced Phase Separation in PS/PMMA/Epoxy Blends
(Wiley VCH Verlag, 2002-04-11)
Homogeneous solutions of polystyrene (PS) and poly(methyl methacrylate) (PMMA) in diglycidylether of bisphenol A, containing about 8 wt.‐% total thermoplastic, and with or without 0.5 wt.‐% of a PS‐b‐PMMA block copolymer, ...