Buscar
Mostrando ítems 1-10 de 599
About the measurement of dynamic mechanical properties of bi-layer systems
(Elsevier Science Sa, 2004-12)
The bi-layer system has been well developed for many engineering structural components in the aircraft, automotive, microelectronics and modern space industries in the last few decades. Consequently, a good determination ...
Correlation between Flexural–Tensile Performance of Concrete Reinforced with Hooked-End Steel Fibers Using US and European StandardsCorrelación entre el rendimiento de flexión-tracción de Concreto Reforzado con Fibras de Acero de Extremo Gancho Uso de estándares estadounidenses y europeos
(Journal of Materials in Civil Engineering, 2021)
: ACI 318 and the fib Model Code 2010 prescribe recommendations for the design of steel fiber–reinforced concrete (SFRC) using performance measured with a four-point bending test (4PBT) per the ASTM C1609 US standard and ...
Interface fracture surface energy of sol–gel bonded silicon wafers by three-point bending
(Springer, 2012)
To probe the interface of silicon sol–gel bonded
wafers we developed in–situ micromechanical bending test
coupled with optical microscopy. The silicon wafers were
bonded together at room temperature using sol–gel ...
Design of SFRC members aided by a multiscale model: Part I – Predicting the post-cracking parameters
(2020-06-01)
The use of steel fiber reinforced concrete (SFRC) is directly related to its post-cracking behavior in tension. The flexural three-point-bending test (3-PBT) according to EN 14651 is among the most recommended tests to ...
Inverse method for the analysis of instrumented impact tests of polymers
(Elsevier, 2007-09-02)
Impact testing has become an important technique to determine the parameters associated with dynamic fracture of polymeric materials. These parameters are commonly calculated from the experimentally measured load versus ...
Influence of Displacements on Calculus of the Longitudinal Modulus of Elasticity of Pinus Caribaea Structural Round Timber Beams
(Scientific & Academic PublishingRosemead, 2012)
Round timber shows great potential for use as a building material, having the advantage of not being proc-essed, such as the sawn wood. In Brazil, the normative standards that deal with the existing round timber elements ...
High Temperature Mechanical Behavior of Porous Cordierite-Based Ceramic Materials Evaluated Using 3-Point Bending
(Elsevier, 2015-04)
Cordierite-based ceramics are an important segment of the present ceramic industry. In the last years, cordierite-based porous ceramics have received great attention as light structural materials, thermal insulting and ...
Polymerization stress of resin composites as a function of system compliance
(ELSEVIER SCI LTD, 2008)
Objectives. Evaluate the effect of testing system compliance on polymerization stress and stress distribution of composites. Methods. Composites tested were Filtek Z250 (FZ), Herculite (HL), Tetric Ceram (TC), Helio Fill-AP ...