Buscar
Mostrando ítems 1-10 de 388
Effect of storage and aging conditions on the flexural strength and flexural modulus of CAD/CAM materials
(Japanese Soc Dental Materials Devices, 2019-04-01)
Computer-aided design/computer-aided manufacturing (CAD/CAM) materials were submitted to thermocycling, to identify changes in mechanical behavior. Four CAD/CAM materials were divided in four subordinate groups (n=9): (1) ...
Correlation between Flexural–Tensile Performance of Concrete Reinforced with Hooked-End Steel Fibers Using US and European StandardsCorrelación entre el rendimiento de flexión-tracción de Concreto Reforzado con Fibras de Acero de Extremo Gancho Uso de estándares estadounidenses y europeos
(Journal of Materials in Civil Engineering, 2021)
: ACI 318 and the fib Model Code 2010 prescribe recommendations for the design of steel fiber–reinforced concrete (SFRC) using performance measured with a four-point bending test (4PBT) per the ASTM C1609 US standard and ...
Effect of thermocycling on the flexural and impact strength of urethane-based and high-impact denture base resins
(Wiley-Blackwell, 2012-06-01)
Objective: Mechanical properties of the acrylic resins used for denture fabrication may be influenced by water and temperature. Thus, the aim of this study was to evaluate the effect of thermocycling on the flexural and ...
Effect of thermocycling on the flexural and impact strength of urethane-based and high-impact denture base resins
(Wiley-Blackwell, 2012-06-01)
Objective: Mechanical properties of the acrylic resins used for denture fabrication may be influenced by water and temperature. Thus, the aim of this study was to evaluate the effect of thermocycling on the flexural and ...
Three-point bending testing of fibre posts: critical analysis by finite element analysis
(Wiley-blackwellMaldenEUA, 2011)
Flexural strength of a pressable lithium disilicate ceramic: influence of surface treatments
(2013-01-01)
The aim of this paper was to evaluate the influence of different surface treatments on the flexural strength of a pressable lithium disilicate ceramic. Sixteen bars (16x2x4 mm) were made, divided into subgroups (n = 10), ...
Effect of microwave disinfection on the flexural strength of hard chairside reline resins
(Elsevier B.V., 2005-10-01)
Objectives: This study investigated the effect of microwave disinfection (650 W/6 min) on the flexural strength of five hard chairside reline resins (Kooliner, Duraliner II, Tokuso Rebase Fast, Ufi Get Hard, New Truliner) ...
Effect of microwave disinfection on the flexural strength of hard chairside reline resins
(Elsevier B.V., 2005-10-01)
Objectives: This study investigated the effect of microwave disinfection (650 W/6 min) on the flexural strength of five hard chairside reline resins (Kooliner, Duraliner II, Tokuso Rebase Fast, Ufi Get Hard, New Truliner) ...
Flexural Strength of Four Adhesive Fixed Dental Prostheses of Composite Resin Reinforced with Glass Fiber
(Quintessence Publishing Co Inc, 2012-01-01)
Purpose: To evaluate the flexural strength of two fixed dental prosthesis (FDP) designs simulating frameworks of adhesive fixed partial prostheses, reinforced or not by glass fiber.Materials and Methods: Forty specimens, ...