Buscar
Mostrando ítems 1-10 de 27
Microcrack growth and fatigue behavior of a duplex stainless steel
(Elsevier, 2009-11)
The kinetics of microcrack growth during cycling has been studied in a S32205 duplex stainless steel in the as-received and aged (100 h at 475 °C) conditions. Cylindrical specimens with a shallow notch were subjected to a ...
Identification of mechanisms of microcracks nucleation in dual-phase steels under cyclic loading
(Editions Physique, 1994-01-01)
Identification of mechanisms of microcracks nucleation in dual-phase steels under cyclic loading
(Editions Physique, 1994-01-01)
The role of microstructure in fatigue crack initiation of 9-12%Cr reduced activation ferritic-martensitic steel
(Elsevier, 2015-11)
Electron back-scattered diffraction together with scanning and transmission electron microscopy were used to study nucleation of microstructural fatigue cracks in reduced-activation ferritic-martensitic steel, EUROFER 97. ...
The role of microstructure in fatigue crack initiation and propagation in 9-12Cr ferritic-martensitic steels
(Elsevier, 2014-06)
The present paper presents low-cycle fatigue results about cyclic behaviour, the evolution of the dislocation structure and the nucleation and propagation of microstructural cracks in commercial ferritic-martensitic steel ...
Effect of initial microstructure on surface relief and fatigue crack initiation in AISI 410 ferritic-martensitic steel
(Wiley Blackwell Publishing, Inc, 2019-01)
This work is focused on the effect of the initial tempered-lath microstructure on the surface relief and nucleation of microstructurally short fatigue cracks developed during low-cycle fatigue tests of the ferritic-martensitic ...
Identification of mechanisms of microcracks nucleation in dual-phase steels under cyclic loading
(Editions Physique, 2014)
Improvement in the fatigue strength of chromium electroplated AISI 4340 steel by shot peening
(Wiley-Blackwell Publishing, Inc, 2009-02-01)
In landing gear, an important mechanical component for high responsible applications, wear and corrosion control is currently accomplished by chrome plating or hard anodising. However, some problems are associated with ...
Improvement in the fatigue strength of chromium electroplated AISI 4340 steel by shot peening
(Wiley-Blackwell Publishing, Inc, 2009-02-01)
In landing gear, an important mechanical component for high responsible applications, wear and corrosion control is currently accomplished by chrome plating or hard anodising. However, some problems are associated with ...
Internal Residual Stresses in Sintered and Commercial Low Expansion Li(2)O-Al(2)O(3)-SiO(2) Glass-Ceramics
(WILEY-BLACKWELL, 2011)
We performed Synchrotron X-ray diffraction (XRD) analyses of internal residual stresses in monolithic samples of a newly developed Li(2)O-Al(2)O(3)-SiO(2) (LAS) glass-ceramic produced by sintering and in a commercial LAS ...